How would i get this wobble with massive

hardware, software, tips and tricks
Forum rules
By using this "Production" sub-forum, you acknowledge that you have read, understood and agreed with our terms of use for this site. Click HERE to read them. If you do not agree to our terms of use, you must exit this site immediately. We do not accept any responsibility for the content, submissions, information or links contained herein. Users posting content here, do so completely at their own risk.

Quick Link to Feedback Forum
Locked
User avatar
SkeeterDubstep
Posts: 151
Joined: Fri Dec 30, 2011 7:16 pm
Location: Chicago
Contact:

How would i get this wobble with massive

Post by SkeeterDubstep » Mon Jan 02, 2012 3:10 am



it starts at 29
its like a growling robo sound if you get what i mean

if anybody could help me to get something similar it would be great:) please and thank you! :W:

elyhess
Posts: 837
Joined: Wed Oct 12, 2011 3:33 am

Re: How would i get this wobble with massive

Post by elyhess » Mon Jan 02, 2012 3:43 am

There is a thread for this!

VirtualMark
Posts: 1821
Joined: Tue Aug 03, 2010 12:15 am
Location: UK

Re: How would i get this wobble with massive

Post by VirtualMark » Mon Jan 02, 2012 4:35 am

Set osc 1 to about 3pm, change to formant. Assign lfo5 to osc 1 intensity. Change pitch to -14.7, route to filter 1. Osc 2 waveform deep throat, tune to +48, assign lfo 6 to osc2 volume. route osc2 to filter 2. osc 3 square wave, -30 pitch, assign to both filters. set modulation osc to -0.78, assign phase mod to osc 3, ring mod to osc2. assign lfo 7 to mod osc, +19semitones.

have filter 1 scream with scream and reso on full, have osc 2 comb with both on full again. put insert 1 and 2 after each filter, and set to sine shaper and hardclipper on maximum to give it some bite. turn feedback and noise osc to full.

go to the voicing tab, set max and unisono to 16. keep it on poly for a fatter sound. turn on pitch cutoff about halfway.

fx1 should be brauner tube set high. fx2 should be reverb on maximum wet and large size. assign lfo 8 to size.


now this is the basic sound, but you'll need to frequency split this into at least 5 different bands, and add distortion to each of them until it sounds right.

User avatar
SkeeterDubstep
Posts: 151
Joined: Fri Dec 30, 2011 7:16 pm
Location: Chicago
Contact:

Re: How would i get this wobble with massive

Post by SkeeterDubstep » Mon Jan 02, 2012 4:39 am

Thank you mark!

User avatar
GhostMutt
Posts: 78
Joined: Tue Jan 18, 2011 8:39 am

Re: How would i get this wobble with massive

Post by GhostMutt » Mon Jan 02, 2012 4:49 am

I don't think 5 bands is enough.

You should split each of the splits again in increments of pi but make sure you follow it to 140 decimal places.

User avatar
Earjax
Posts: 524
Joined: Mon Mar 21, 2011 6:33 pm
Location: London, UK
Contact:

Re: How would i get this wobble with massive

Post by Earjax » Mon Jan 02, 2012 2:10 pm

^ :L Layering is pretty key with these sort of excision sounding synths, try duplicating massive twice and fiddling around with filters and wavetables to give different sounds on each layer. Not sure about using a formant virutalmark, but definitely scream filter and deepthroat
Footwork:
Soundcloud
Jakwob remix:
Soundcloud

VirtualMark
Posts: 1821
Joined: Tue Aug 03, 2010 12:15 am
Location: UK

Re: How would i get this wobble with massive

Post by VirtualMark » Mon Jan 02, 2012 10:59 pm

GhostMutt wrote:I don't think 5 bands is enough.

You should split each of the splits again in increments of pi but make sure you follow it to 140 decimal places.
:lol: :lol: :lol:

i forgot that part, thanks for the tip. also forgot to mention to run it through at least 10 guitar amps for more bite.

User avatar
GhostMutt
Posts: 78
Joined: Tue Jan 18, 2011 8:39 am

Re: How would i get this wobble with massive

Post by GhostMutt » Mon Jan 02, 2012 11:18 pm

Word word.
For best results run a lead from the headphone jack to the mic input so it layers the warmth.

mwb01
Posts: 8
Joined: Mon Jan 02, 2012 12:39 pm

Re: How would i get this wobble with massive

Post by mwb01 » Tue Jan 03, 2012 7:46 am

not as complicated as you think

Furyenvy
Posts: 6
Joined: Sat May 21, 2011 7:18 pm

Re: How would i get this wobble with massive

Post by Furyenvy » Fri Jan 06, 2012 11:57 pm

VirtualMark wrote:Set osc 1 to about 3pm, change to formant. Assign lfo5 to osc 1 intensity. Change pitch to -14.7, route to filter 1. Osc 2 waveform deep throat, tune to +48, assign lfo 6 to osc2 volume. route osc2 to filter 2. osc 3 square wave, -30 pitch, assign to both filters. set modulation osc to -0.78, assign phase mod to osc 3, ring mod to osc2. assign lfo 7 to mod osc, +19semitones.

have filter 1 scream with scream and reso on full, have osc 2 comb with both on full again. put insert 1 and 2 after each filter, and set to sine shaper and hardclipper on maximum to give it some bite. turn feedback and noise osc to full.

go to the voicing tab, set max and unisono to 16. keep it on poly for a fatter sound. turn on pitch cutoff about halfway.

fx1 should be brauner tube set high. fx2 should be reverb on maximum wet and large size. assign lfo 8 to size.


now this is the basic sound, but you'll need to frequency split this into at least 5 different bands, and add distortion to each of them until it sounds right.
I have followed this to the teeth and have come up with all sorts of noise. How the heck aren't you clipping? there are a ton of filters set on max wet and size. Am I missing something huge or is there something big you forgot to include?

User avatar
Eat Bass
Posts: 1843
Joined: Wed Oct 19, 2011 8:01 pm

Re: How would i get this wobble with massive

Post by Eat Bass » Sat Jan 07, 2012 12:00 am

Furyenvy wrote:
VirtualMark wrote:Set osc 1 to about 3pm, change to formant. Assign lfo5 to osc 1 intensity. Change pitch to -14.7, route to filter 1. Osc 2 waveform deep throat, tune to +48, assign lfo 6 to osc2 volume. route osc2 to filter 2. osc 3 square wave, -30 pitch, assign to both filters. set modulation osc to -0.78, assign phase mod to osc 3, ring mod to osc2. assign lfo 7 to mod osc, +19semitones.

have filter 1 scream with scream and reso on full, have osc 2 comb with both on full again. put insert 1 and 2 after each filter, and set to sine shaper and hardclipper on maximum to give it some bite. turn feedback and noise osc to full.

go to the voicing tab, set max and unisono to 16. keep it on poly for a fatter sound. turn on pitch cutoff about halfway.

fx1 should be brauner tube set high. fx2 should be reverb on maximum wet and large size. assign lfo 8 to size.


now this is the basic sound, but you'll need to frequency split this into at least 5 different bands, and add distortion to each of them until it sounds right.
I have followed this to the teeth and have come up with all sorts of noise. How the heck aren't you clipping? there are a ton of filters set on max wet and size. Am I missing something huge or is there something big you forgot to include?
did you remember to frequency split all 5 bands and process them separately? thats the end all be all right there, will get rid of all your troubles.

Locked

Who is online

Users browsing this forum: No registered users and 0 guests