3D Printing stuff

Off Topic (Everything besides dubstep)
Forum rules
Please read and follow this sub-forum's specific rules listed HERE, as well as our sitewide rules listed HERE.

Link to the Secret Ninja Sessions community ustream channel - info in this thread
User avatar
lovelydivot
Posts: 2265
Joined: Sat Sep 08, 2012 7:44 pm

Re: Printing stuff

Post by lovelydivot » Mon Mar 18, 2013 6:36 pm

it sounds - so so dry
all electronic devices will be sealed inside of bags filled with conductive plasma...

Image


Black people have to spend a large portion of their day in pressurized mineral baths
or else their eyes turn blue and they lose their sense of pretty much everything.
An entire mixed race of people has emerged to tend exclusively to this branch of our culture...
People decended from ancient families with an instictual almost telepathic ability to cultivate
the coconut palm, shea nut, avacado, and olive tree in fiercly protected and precariously balanced bio-regions.

They are called - Dominicans

User avatar
lovelydivot
Posts: 2265
Joined: Sat Sep 08, 2012 7:44 pm

Re: Printing stuff

Post by lovelydivot » Mon Mar 18, 2013 7:22 pm

Image

White people are prohibited from using the baths because
they spontanously develop all kinds of bizarre and uncontrollable super abilities
Like phasing in and out of existence at any given time or spot in particular...origin of the humorous phrase
"So -Where you at" - commonly found in music appreciated by delinquents
or more commonly - becoming sentient with the entire population for extended periods of time
and eventually - vegetarianism.

It has not been determined if Black people suffer from these super abilities as they are mostly secretive.
Vegetarianism has been documented.

User avatar
lovelydivot
Posts: 2265
Joined: Sat Sep 08, 2012 7:44 pm

Re: Printing stuff

Post by lovelydivot » Tue Mar 19, 2013 1:26 am

In case you haven't figured it out....

I am cracking myself up at this point...



You know I'm the first one to go jump in a prohibited mineral bath...
and end up spending the next 4 years trying to figure out what the fuck just happened..

User avatar
dickman69
Posts: 14517
Joined: Wed Mar 24, 2010 3:58 am
Location: Pittsburgh

Re: Printing stuff

Post by dickman69 » Tue Mar 19, 2013 1:55 am

bm quit being racist
every Tuesday 11pm EST on http://cosmicsound.club

buy my tunes pls
Soundcloud

User avatar
lovelydivot
Posts: 2265
Joined: Sat Sep 08, 2012 7:44 pm

Re: Printing stuff

Post by lovelydivot » Tue Mar 19, 2013 2:16 am

starts fighting - breaks free and runs out back entrance

User avatar
lovelydivot
Posts: 2265
Joined: Sat Sep 08, 2012 7:44 pm

Re: Printing stuff

Post by lovelydivot » Tue Mar 19, 2013 2:30 am

I try to imbue a people with superabilities - get accused of segregation

hate all of you

User avatar
lovelydivot
Posts: 2265
Joined: Sat Sep 08, 2012 7:44 pm

Re: Printing stuff

Post by lovelydivot » Tue Mar 19, 2013 2:47 am

Image


un-huh

User avatar
alphacat
Posts: 6016
Joined: Mon Feb 13, 2006 7:52 pm

Re: Printing stuff

Post by alphacat » Wed Mar 27, 2013 12:33 am

[long record pull-up scratch]

3D Printed Guns (Documentary)


and

Your 3D Printer Could Eat Empty Milk Jugs Instead of Expensive Plastic

-q-

User avatar
incnic
Permanent Vacation
Posts: 5841
Joined: Fri Jun 20, 2008 9:28 am

Re: Printing stuff

Post by incnic » Wed Mar 27, 2013 1:05 am

retarded fake marketiung shite
i dont want a fucking plastic gun
andyway its ony;l tye cartidge thing
and it cracks cos its made for printint WOW figures not guns
brostep

User avatar
lovelydivot
Posts: 2265
Joined: Sat Sep 08, 2012 7:44 pm

Re: Printing stuff

Post by lovelydivot » Wed Mar 27, 2013 1:53 am

WOW - no paranoid grandiose delusional egotistical sociopathic tendencies there... :x



That just goes to prove that a person can be decently intelligent and still be completely retarded.

User avatar
dickman69
Posts: 14517
Joined: Wed Mar 24, 2010 3:58 am
Location: Pittsburgh

Re: Printing stuff

Post by dickman69 » Wed Mar 27, 2013 2:54 am

printing guns is pretty badass tbh
every Tuesday 11pm EST on http://cosmicsound.club

buy my tunes pls
Soundcloud

User avatar
alphacat
Posts: 6016
Joined: Mon Feb 13, 2006 7:52 pm

Re: Printing stuff

Post by alphacat » Wed Mar 27, 2013 6:47 pm

incnic wrote:retarded fake marketiung shite
i dont want a fucking plastic gun
andyway its ony;l tye cartidge thing
and it cracks cos its made for printint WOW figures not guns
Glock 23's are made of plastic and they'll drill a hole in yr skull just fine.

User avatar
DRTY
Posts: 7900
Joined: Mon Apr 21, 2008 6:08 pm
Location: Bournemouth

Re: Printing stuff

Post by DRTY » Wed Mar 27, 2013 7:41 pm

knell wrote:
Terpit wrote: It seems pretty interesting, but im not sure what the implications are, printing all our food? or even all household goods, only having to shop for whatever material the printers need?
household goods? there's already plans to make houses themselves 3D printable. if it becomes practical and commercialized then it would be the next big thing, but it wouldn't exactly be the star trek replicator
u cant print a house m8

User avatar
alphacat
Posts: 6016
Joined: Mon Feb 13, 2006 7:52 pm

Re: Printing stuff

Post by alphacat » Wed Mar 27, 2013 7:48 pm

DRTY wrote:
knell wrote:
Terpit wrote: It seems pretty interesting, but im not sure what the implications are, printing all our food? or even all household goods, only having to shop for whatever material the printers need?
household goods? there's already plans to make houses themselves 3D printable. if it becomes practical and commercialized then it would be the next big thing, but it wouldn't exactly be the star trek replicator
u cant print a house m8
Image

http://www.treehugger.com/green-archite ... strip.html

http://www.gizmag.com/kamermaker-3d-pri ... use/26752/

http://www.dezeen.com/2013/03/09/amster ... ted-house/

http://www.dezeen.com/2013/02/13/protoh ... ll-design/

http://mhl.nu/printed-house.html

User avatar
DRTY
Posts: 7900
Joined: Mon Apr 21, 2008 6:08 pm
Location: Bournemouth

Re: Printing stuff

Post by DRTY » Wed Mar 27, 2013 7:48 pm

alphacat wrote:
DRTY wrote:
knell wrote:
Terpit wrote: It seems pretty interesting, but im not sure what the implications are, printing all our food? or even all household goods, only having to shop for whatever material the printers need?
household goods? there's already plans to make houses themselves 3D printable. if it becomes practical and commercialized then it would be the next big thing, but it wouldn't exactly be the star trek replicator
u cant print a house m8
Image

http://www.treehugger.com/green-archite ... strip.html

http://www.gizmag.com/kamermaker-3d-pri ... use/26752/

http://www.dezeen.com/2013/03/09/amster ... ted-house/

http://www.dezeen.com/2013/02/13/protoh ... ll-design/

http://mhl.nu/printed-house.html
I WONT HAVE A FUCKING JOB

User avatar
alphacat
Posts: 6016
Joined: Mon Feb 13, 2006 7:52 pm

Re: Printing stuff

Post by alphacat » Wed Mar 27, 2013 7:50 pm

It's already happening...

http://www.treehugger.com/slideshows/gr ... ity-facit/

Time for you to brush up on your CAD/CAM skills son. ;)

User avatar
DRTY
Posts: 7900
Joined: Mon Apr 21, 2008 6:08 pm
Location: Bournemouth

Re: Printing stuff

Post by DRTY » Wed Mar 27, 2013 7:53 pm

Image

User avatar
lovelydivot
Posts: 2265
Joined: Sat Sep 08, 2012 7:44 pm

Re: Printing stuff

Post by lovelydivot » Thu Mar 28, 2013 4:17 pm

This is what is going to happen...

Just like contemporary architecture
whose main purpose was to write a streamlined production into the design...
and make use of pre-fab materials to bring down the cost...to make it affordable to everyone...
and what happens to it? exactly the opposite...ends up being strictly for the uber wealthy.

At first everyone is excited to jump on the novel idea -
soon everyone is building their little ikea snap-lock houses...
real builders and their art isn't needed in great numbers - as modular factories have all the business...

the art is lost on a wide swathe of people

- then the modular factory - with no competition - starts to drive the price back up

and all of the money goes to the ..."1%" - FACTORY BORG

All regular jacks end up standing on a production line screwing in a single screw - 12 hour shifts
- getting paid minimun - no chance of ever learning it or owning it.


I really have a venoumous amount of cynicism when it comes to money
and how people are engineering to get it all.

proprietary technology is one way...
Last edited by lovelydivot on Thu Mar 28, 2013 5:36 pm, edited 3 times in total.

User avatar
frank grimes jr.
Posts: 2446
Joined: Fri Jun 13, 2008 5:05 pm
Location: BOSTON
Contact:

Re: Printing stuff

Post by frank grimes jr. » Thu Mar 28, 2013 4:29 pm

http://www.gizmag.com/burritobot-burrito-printer/23026/

Only reason I see a need for 3D printing.
Image

Just because you are a character, does not mean you have character.

User avatar
lovelydivot
Posts: 2265
Joined: Sat Sep 08, 2012 7:44 pm

Re: Printing stuff

Post by lovelydivot » Thu Mar 28, 2013 4:40 pm

seriously

If you want to learn how to build a house...learn how to use a circular saw and routers...

you don't need to pay for a special school to learn and have access to - a large scale cnc milling machine...



I fought this all the way through school - I don't trust this - people...

They will let you do it for a large sum of money and stay on top - by obsolescing the tools we have now.

I've stood next to these machines in the industrial design lab
- and I felt like satan was trying to get me to gamble me on the super big dream.

Breeding a taste for luxury goods.

maybe they were trying to help me be employed or something - in service to the king or whoever has money...


Fuck them and their boats.
Last edited by lovelydivot on Thu Mar 28, 2013 4:47 pm, edited 3 times in total.

Locked

Who is online

Users browsing this forum: No registered users and 0 guests