how to flesh out tracks?

hardware, software, tips and tricks
Forum rules
By using this "Production" sub-forum, you acknowledge that you have read, understood and agreed with our terms of use for this site. Click HERE to read them. If you do not agree to our terms of use, you must exit this site immediately. We do not accept any responsibility for the content, submissions, information or links contained herein. Users posting content here, do so completely at their own risk.

Quick Link to Feedback Forum
Locked
Syni
Posts: 2
Joined: Thu Jun 13, 2013 6:16 pm

how to flesh out tracks?

Post by Syni » Sat Jun 15, 2013 11:14 pm

hello forum. I need some advice on figuring out how to flesh out my projects.

Lately, whenever I have a good idea for a track, I work on what essentially is the climax or most exciting/essential part of it. And I just keep layering it with new tracks, but... I always hit a brick wall. I'm not sure how to flesh it out into a full song.

I'll have a beat going with every element of the beat playing at once, in its fullest form, as well as a melody or two and the bassline, and any additional effects that sound good... but it's essentially just a loop. How do I make a track evolve into that? Where do I start? And most importantly, how do I progress from an intro to these loops?

heres an example of what I mean, I've been just doing loops like this recently and just leaving them at a certain point...

http://speedy.sh/JFVWC/61113-yeahokay-2.wav

That's just a loop I've been working on, but I'm stuck now. That last part is a quieter part I liked because of the ringy ambiance. But I don't know how to turn this into a song from here. I used to make trance music, and I got pretty good at it. But I found trance music to be way too formulaic, and constricted by a specific track layout. You could customize the flow of energy a little bit depending on how it was laid out, but it was still essentially the same; a formula. I find that dubstep/garage/the stuff I want to make now isn't so much of a formula anymore, and while I love that (it's why I stopped making trance after all, need more expression) it's much harder to grasp how to pull things together in a way that works.

To be clear, I'm not asking what order project workflow should be done in. I'm more asking what kinds of things should I be adding to turn a loop like this into a full song... I need possibly new melodic lines, new effects, but I don't know where and when to have them...

__________
Posts: 6338
Joined: Tue Mar 06, 2007 5:51 pm

Re: how to flesh out tracks?

Post by __________ » Sat Jun 15, 2013 11:28 pm

With dubstep, many song structures are acceptable.
Why not try Coki's?

e.g:

16-bar intro
drop in to main loop
repeat main loop for 4:30 mins

titchbit
Posts: 3536
Joined: Sat May 11, 2013 8:16 pm
Location: levitating on bass weight

Re: how to flesh out tracks?

Post by titchbit » Sun Jun 16, 2013 12:25 am

Lyrics.

fragments
Posts: 3552
Joined: Fri Dec 31, 2010 7:24 pm
Location: NEOhio
Contact:

Re: how to flesh out tracks?

Post by fragments » Sun Jun 16, 2013 12:56 am

There are thousands of examples to listen. Go listen to them and take notes.
SunkLo wrote: If ragging on the 'shortcut to the top' mentality makes me a hater then shower me in haterade.

Add9
Posts: 310
Joined: Sun Jun 09, 2013 5:39 am

Re: how to flesh out tracks?

Post by Add9 » Sun Jun 16, 2013 3:22 am

fragments wrote:There are thousands of examples to listen. Go listen to them and take notes.
This. Literally count the bars out and note when each new element is introduced or what points the track changes significantly. The best thing I ever did to improve my production skills was to start downloading professional tracks into my DAW and trying to remake them.
WolfCryOfficial wrote:Have fun on your musical campaign to hell.

Syni
Posts: 2
Joined: Thu Jun 13, 2013 6:16 pm

Re: how to flesh out tracks?

Post by Syni » Sun Jun 16, 2013 3:50 am

Add9 wrote:
fragments wrote:There are thousands of examples to listen. Go listen to them and take notes.
This. Literally count the bars out and note when each new element is introduced or what points the track changes significantly. The best thing I ever did to improve my production skills was to start downloading professional tracks into my DAW and trying to remake them.
Okay, I'll give this a shot more often. thanks!

User avatar
antman
Posts: 367
Joined: Sat Jan 01, 2011 10:44 pm
Location: Staten Island, NY

Re: how to flesh out tracks?

Post by antman » Sun Jun 16, 2013 7:37 pm

Its all about finding your own workflow/style. What works for one, will not work for others.
cmgoodman1226 wrote:I don't know what you all are going on about. I listened to it on my beatz by dre headphones that my parents bought me for mixing, and the sub sounds huge! stop hay-in'.
Soundcloud

User avatar
ieatfunk
Posts: 115
Joined: Sat Apr 06, 2013 1:00 am

Re: how to flesh out tracks?

Post by ieatfunk » Mon Jun 17, 2013 11:46 am

I usually start with choosing a key, knowing which keys give off which emotion. Then I go to Absynth or FM8 and play around trying to make a thick pad then create 4-8 bars of pads, then I'd probably introduce a more top melody or percussive element, then after another 4-8 bars introduce some groove, normally in the form of drums, then I'd build it up to the drop/chorus depending on style of track.
Then after 16-32 bars of that I'd bring it back down, reintroduce elements from the intro and make a break or breakdown for 8-16 bars, either introduce some new melody or build up to drop again for another 16-32.
Then outro for 6-8 bars.

That'd be my starting frame, usually I'll change it up a bit depending on how the track feels and how much inspiration I have to draw out longer sections.
I specialise in the delicious manipulation of funk

Soundcloud

User avatar
Gewze
Posts: 2660
Joined: Wed Sep 22, 2010 10:07 pm

Re: how to flesh out tracks?

Post by Gewze » Mon Jun 17, 2013 11:18 pm

Key has emotion aswell? say wha

mtl6
Posts: 133
Joined: Wed Aug 24, 2011 11:20 pm

Re: how to flesh out tracks?

Post by mtl6 » Tue Jun 25, 2013 5:46 pm

Gewze wrote:Key has emotion aswell? say wha
I wouldn't necessarily argue that each key has its own designated emotion. When I first started producing I liked to read about the traditional emotions some people assigned to keys a long long time ago, but I've found that it's mostly just bs... However, if you take all the notes in a melody and transpose them up or down a few tones, you can definitely feel a difference in the overall mood of the melody. This phenomenon is way more complex than just saying C major is happy and cheesy and so on.
chill groovy shit
SoundcloudSoundcloud

Add9
Posts: 310
Joined: Sun Jun 09, 2013 5:39 am

Re: how to flesh out tracks?

Post by Add9 » Tue Jun 25, 2013 6:56 pm

A flat minor is the best key ever IMO
WolfCryOfficial wrote:Have fun on your musical campaign to hell.

titchbit
Posts: 3536
Joined: Sat May 11, 2013 8:16 pm
Location: levitating on bass weight

Re: how to flesh out tracks?

Post by titchbit » Tue Jun 25, 2013 7:11 pm

I think it's scale that has an "emotional" aspect to it, not key.

Add9
Posts: 310
Joined: Sun Jun 09, 2013 5:39 am

Re: how to flesh out tracks?

Post by Add9 » Tue Jun 25, 2013 7:47 pm

Well at least in classical music keys were said to have emotion... like D minor is the key of vengeance or of death, C major is the key of happiness, D major is the key of joy, E flat major is the key of the heavens. Composers like Beethoven made very careful choices about what keys to write in because they believed them to convey specific emotions. I dunno if this is actually true, but it's interesting nonetheless
WolfCryOfficial wrote:Have fun on your musical campaign to hell.

User avatar
ieatfunk
Posts: 115
Joined: Sat Apr 06, 2013 1:00 am

Re: how to flesh out tracks?

Post by ieatfunk » Tue Jun 25, 2013 11:47 pm

^^^ and Beethoven wrote Moonlight Sonata, so I'm inclined to follow his beliefs.
I specialise in the delicious manipulation of funk

Soundcloud

twilitez
Posts: 465
Joined: Sun Jul 08, 2012 4:04 am

Re: how to flesh out tracks?

Post by twilitez » Wed Jun 26, 2013 4:37 am

Something ive had to learn the hard way: no synth or sample is holy.
No matter how long youve worked on a particular one; if it falls out of key/ style/ general ambience or whatever at some point, replace it. I sometimes find myself finetuning a certain sound to 1/100s of a semitone for a while, but how dumb is that really. Thats just me though ive no idea if that ever bothers you. Generally speaking of arrangement though, dont overthink it. Its fine to stick to a general format but not everything has to be completely 'DJ-friendly' either. Unless your working in a crazy time signature, competent DJ's will be able to mix your stuff.

That said, to get out of 'loopitis', lay down the elements of your track that sound alright in a logical way, and stretch it out to something close to a full song length, THEN worry about dull moments and spots where you need to grab peoples attention. There are a million ways you can do that with little sweeps, stabs, fx and some drum (rhythm) modulations.

Huts
Posts: 775
Joined: Wed Mar 02, 2011 5:08 am
Contact:

Re: how to flesh out tracks?

Post by Huts » Wed Jun 26, 2013 5:43 am

I always found this pretty helpful when choosing keys http://www.gradfree.com/kevin/some_theo ... l_keys.htm
yung tiesto
Soundcloud

User avatar
ehbes
Posts: 19109
Joined: Fri Jul 15, 2011 2:34 pm
Location: Massachusetts

Re: how to flesh out tracks?

Post by ehbes » Wed Jun 26, 2013 10:43 pm

dubunked wrote:Lyrics.
This, or at the very least cut up vocals.
Paypal me $2 for a .wav of Midnight
https://soundcloud.com/artend
Dead Rats wrote:Mate, these chaps are lads.

User avatar
Capture pt
Posts: 1294
Joined: Thu Jul 29, 2010 12:19 am
Location: Southampton

Re: how to flesh out tracks?

Post by Capture pt » Fri Jun 28, 2013 4:44 pm

Something I like to do is load in a track into your DAW from an artist you like.


In your track sequencer stick down little empty tracks as notes for when shit changes etc. (or write it down.)

Then copy paste your existing loops to fill up the track. You now have 6 minutes of the same 32/64/whatever bars.

But you have your notes to see where you want your intro, and where you breakdowns are, and so on etc.

Locked

Who is online

Users browsing this forum: No registered users and 0 guests