The Reese Bass Thread

[Local Hero]

Hi guys

My Reese:

Soundcloud

growl:

Soundcloud



just basic fm in sytrus + Vocodex + Harmor.If somebody´s interested, I can elaborate more on how I did those.

[tomz]

Can you elaborate on the growl?

[Local Hero]

yeah!

the growl is a combination of a patch in sytrus (a sawtooth waveform with added harmonics on the fundamental being modulated by an another saw to get the vowely sound) and a vocal sample from the FL studio stock samples, that says "oh yeah!)

i run both of them through vocodex, the synth is obviously the carrier and the vocal sample the modulator, record it in edison and drag it into harmor and use its internal distortion, unison and chorus to beef up the sound.record again and drag into another harmor...rinse and repeat...and voila!phat growl:)

it is important to put the chorus/phaser/flanger (or any pitch-related effect) after the distortion, because the pitch difference in the signal caused by those effects (chorus is closely related to unison) is the thing, that causes the "magic".

experiment with noth filters after or/and automate a lowpass filter to get those noisia bass cuts.

[tomz]

Thanks man.

[PhotonOfficial]

Got a few reeses in this WIP at 0:55 and 1:59. Build up isn't finished yet obviously but yeah. If you want a tut, please tell me which sound you want:D thank you:)

Soundcloud

[LogiSpark]

Got a few reeses in this WIP at 0:55 and 1:59. Build up isn't finished yet obviously but yeah. If you want a tut, please tell me which sound you want:D thank you:)

Soundcloud

The drums remind of Reso- Axion (Koan Sound Remix), the reese is very good, are you okay to give some details?

[PhotonOfficial]

Got a few reeses in this WIP at 0:55 and 1:59. Build up isn't finished yet obviously but yeah. If you want a tut, please tell me which sound you want:D thank you:)

Soundcloud

The drums remind of Reso- Axion (Koan Sound Remix), the reese is very good, are you okay to give some details?

Thank you, and of course! Which sound specifically as there are a few different reeses chopped up?

[LogiSpark]

Got a few reeses in this WIP at 0:55 and 1:59. Build up isn't finished yet obviously but yeah. If you want a tut, please tell me which sound you want:D thank you:)

Soundcloud

The drums remind of Reso- Axion (Koan Sound Remix), the reese is very good, are you okay to give some details?

Thank you, and of course! Which sound specifically as there are a few different reeses chopped up?

First reese of 0:55, and also what DAW do you use (I'm curious XD), I use FL

[PhotonOfficial]

Got a few reeses in this WIP at 0:55 and 1:59. Build up isn't finished yet obviously but yeah. If you want a tut, please tell me which sound you want:D thank you:)

Soundcloud

The drums remind of Reso- Axion (Koan Sound Remix), the reese is very good, are you okay to give some details?

Thank you, and of course! Which sound specifically as there are a few different reeses chopped up?

First reese of 0:55, and also what DAW do you use (I'm curious XD), I use FL

For that reese part I used FM8.

It consists of one sawtooth operator at the default ratio of 1.00 being modulated by 50% from a second sawtooth operator at a ratio of 2.00, and the second operator is being modulated 30% by a third sawtooth operator again at a ratio of 2.00. I then used the unison part of FM8 and gave it 32 voices and a moderate amount of detune. I then used frequency splitting with mild chorus and flanger on the highs along with some distortion and a stereo enhancer (not stereo delay), tiny amount of distortion and chorus on the mids and some gentle saturation on the lows. I then bussed it together and did some simple eq automation, added some reverb and bob was my uncle. The trick is in the EQ automation.

[LogiSpark]

Hey photon is this what the rough patch looks like?

Master

Expert

Also for those new here, Frequency Splitting can be read here

[PhotonOfficial]

Hey photon is this what the rough patch looks like?

Master

Expert

Also for those new here, Frequency Splitting can be read here

Yes except F should be at a ratio of 1.00 instead of 2.00 and E should be at a ratio of 2.00. Also I used a lot more detune:D

[LogiSpark]

LATE POST! Here a Fl Studio project file on frequency splitting that I made. Just insert your VST and work with your bass on see what you get.

Link

[Augment]

LATE POST! Here a Fl Studio project file on frequency splitting that I made. Just insert your VST and work with your bass on see what you get.

Link

that's actually pretty nice, not much difference from the source sound after running through it, gj

[azuk]

LATE POST! Here a Fl Studio project file on frequency splitting that I made. Just insert your VST and work with your bass on see what you get.

Link

Here's a 3-band Split in Patcher, you only will need 1 Mixer insert.

http://www.mediafire.com/download/510kz ... te_(1).fst

[Kilo beats]

the reece in sleeper - systema sends shivers down my spine



any tips on making this one / modulation going on?

[Kilo beats]

not really a reece per-se. I thought id try the reece de-tuning trick on sine waves for a reecy-sine.

sine sub in the center & 2x more sine waves de-tuned with FX on

Soundcloud

not sure if i would use it in a track though

[LogiSpark]

How do make this kind of reese? It sound a bit squelchy with a dark tone to it

not really a reece per-se. I thought id try the reece de-tuning trick on sine waves for a reecy-sine.

sine sub in the center & 2x more sine waves de-tuned with FX on

not sure if i would use it in a track though

Would make a great bass for an ambient or drone track.

[bouncingfish]

How do make this kind of reese? It sound a bit squelchy with a dark tone to it
.

Both MakO and Kursa have podcasts on BassGorilla.com and one of them (can't remember which one) has lots of bass tricks&tips.

[Ledger]

I feel good.

Soundcloud

[TheOcularInvisible]

How would I make that sort of heavier "chugging" Reese like in Dustup by Noisia and the Upbeats?