Distortion (OHM Force)

hardware, software, tips and tricks
Forum rules
By using this "Production" sub-forum, you acknowledge that you have read, understood and agreed with our terms of use for this site. Click HERE to read them. If you do not agree to our terms of use, you must exit this site immediately. We do not accept any responsibility for the content, submissions, information or links contained herein. Users posting content here, do so completely at their own risk.

Quick Link to Feedback Forum
Locked
djrum
Posts: 31
Joined: Mon Dec 03, 2007 4:20 pm

Distortion (OHM Force)

Post by djrum » Thu Dec 13, 2007 10:02 am

Just started using the Ohmicide plugin, and it's obviously a very powerful tool, but I can't get my head round the manymanymany different types of distortion it offers... They all seem to completely decimate the sound. wich ones are good for sublte warming up, and gentle saturation type stuff

I really like the distortion in Quad Frohmage, is there one in Ohmicide that does the same thing...

deadly_habit
Posts: 22980
Joined: Tue Oct 24, 2006 3:41 am
Location: MURRICA

Post by deadly_habit » Thu Dec 13, 2007 10:41 am

play around the presets and go from there :wink: also layer distorted vol on top of orig (render 2 diff versions) and play with different volumes

djrum
Posts: 31
Joined: Mon Dec 03, 2007 4:20 pm

Post by djrum » Thu Dec 13, 2007 11:11 am

Deadly Habit wrote:play around the presets and go from there
Standard procedure, but with Omicide there are loadandloads of different distortion "Types", and they vary hugely. I jus wanna know wich one i should use...

Deadly Habit wrote:layer distorted vol on top of orig (render 2 diff versions) and play with different volumes
not sure this is really necesary with Ohmicide as it has four channels, and you have dry/wet controls on each of them anyway...

deadly_habit
Posts: 22980
Joined: Tue Oct 24, 2006 3:41 am
Location: MURRICA

Post by deadly_habit » Thu Dec 13, 2007 12:21 pm

i dunno ive had no problems with ohmcide for my purposes, but also been using ohm force plugins for years

djrum
Posts: 31
Joined: Mon Dec 03, 2007 4:20 pm

Post by djrum » Thu Dec 13, 2007 12:53 pm

wiich distortion types d'you reckon are good?

deadly_habit
Posts: 22980
Joined: Tue Oct 24, 2006 3:41 am
Location: MURRICA

Post by deadly_habit » Thu Dec 13, 2007 1:00 pm

for what type of sound? i use a range of diff ohm and other ditortion plugins depending on sound

User avatar
MARCHMELLOW
Posts: 979
Joined: Tue May 08, 2007 9:33 pm
Location: brighton-uk
Contact:

Post by MARCHMELLOW » Thu Dec 13, 2007 1:08 pm

are you setting up and FX track with the distortion on and sending your selected channels to that fx track?, or literally putting the ohmforce distortion over the whole of the selected channel?

reason i ask is that if its on an fx track, then your selected sound you wanna distort won't be totally covered by the distortion, thus solving the issue of why all the presets make your selected sound so mental!
www.soundcloud.com/marchmellowuk

Dub & Run Records/Phreaks of Nature/Wicky Lindows/BassPunch Records/Tsunami Audio/ Love Sick Records.

el hombre invisible
Posts: 34
Joined: Wed Dec 05, 2007 9:15 pm

Re: Distortion (OHM Force)

Post by el hombre invisible » Thu Dec 13, 2007 2:02 pm

DjRUM wrote:wich ones are good for sublte warming up, and gentle saturation type stuff
I really like Ohmicide, and while I'm sure it is capable of subtle warming, don't really think that's it's forte. Try...

Antares Tube
http://www.antarestech.com/products/tube.shtml

PSP Audioware VintageWarmer
http://www.pspaudioware.com/indexen.html
Last edited by el hombre invisible on Thu Dec 13, 2007 9:49 pm, edited 1 time in total.

deadly_habit
Posts: 22980
Joined: Tue Oct 24, 2006 3:41 am
Location: MURRICA

Post by deadly_habit » Thu Dec 13, 2007 2:27 pm

or just some good old analog clipping via gains in an analog mixer 8)
out of that last plugin list posted i'd be lost without vintagewarmer

User avatar
ikeaboy
Posts: 437
Joined: Mon Jun 25, 2007 8:23 pm
Contact:

Post by ikeaboy » Thu Dec 13, 2007 3:10 pm

Just back off on ,I'm not looking at it now but its the large dial called Drive or similar. And try only distorting only a thin band somewhere in the low mids, matching the volume so it doesn't poke out so much. Then scroll through the distortion types.

djrum
Posts: 31
Joined: Mon Dec 03, 2007 4:20 pm

Post by djrum » Thu Dec 13, 2007 4:53 pm

reckon i've not got the drive too high, and it's not 100% wet, but its the Distortion types I'm having trouble with...

I cycle through them and I can't seem to find one that sounds like the one in Frohmage... I'd really like to use Ohmicide to for example warm up the the mid an scramble the fuck out of the top whiles leaving the bottom alone, but I can't get the "type" of distortion I want in the "type" menu...

User avatar
FSTZ
Posts: 7706
Joined: Wed Oct 11, 2006 3:07 am
Location: Cookingham

Post by FSTZ » Thu Dec 13, 2007 5:05 pm

I am unfamiliar with Ohmicide, but if it is anything like Quadfrohmage, or Predadohm there is probably some type of filtering capability

User avatar
pdomino
Posts: 5643
Joined: Mon Apr 24, 2006 2:54 pm

Post by pdomino » Fri Dec 14, 2007 1:39 pm

Gains, feedback, types.

Image

Also check for...
FrOhmage
OhmBoyz
Ohmygod
Predatohm

User avatar
stormfield
Posts: 854
Joined: Sat Jan 14, 2006 5:29 pm
Location: babylondon
Contact:

Post by stormfield » Fri Dec 14, 2007 5:07 pm

PSP VintageWarmer is sick :)
COMBAT 021 : SCORN
"Gravel Bed" - OUT NOW
vinyl // digital // COMBAT HQ // mywace
Combat Recordings on Farcebook

vadarfone
Posts: 282
Joined: Wed May 23, 2007 11:32 am
Location: Saitama, Japan

Post by vadarfone » Sun Dec 16, 2007 3:25 pm

How about you spend some time by yourself with the plug in, read the manual and experiment with what the guys who made it are suggesting and also add some of your own ideas...

Oh yeah, sorry, no one does that anymore do they, they just load it, go UGH and ask on a forum how to use it to make a sound.

Elbow grease my son. Elbow grease.

User avatar
decklyn
Posts: 1551
Joined: Sun Feb 25, 2007 3:29 am
Location: Toronto, Canada

Post by decklyn » Sun Dec 16, 2007 6:47 pm

i'm just getting into distortion and sound decimation. taking my sound into a bit techier direction right now. i'll give my two cents here - i just finished a track with a lot of distortion in it, so I can give you direct reference to sounds that were processed using different plugs and techniques.

PSP vintage warmer is great. the compression and saturation along with eq and just how it treats the sound is really pleasing. where you need to keep things a bit more together this is useful. has a mix knob too so you can bleed in the original signal if you're wanting to keep the original freqs true. I find bass frequencies can quickly dissapear under ditortion, so it's always a consideration when affecting bass instruments to keep the lowest frequencies clean by iether mixing in the original source, or making two instances of the sound, filtering them so one is in the high freq, the other is in the low, and then affecting the top frequency with distortion or w/e so you keep the subs rattling.

i like psp mixbass for saturation. it really destroys the sound though and you'll have noises where there are none in your source material when really pushing it. It's pleasing, but just check it - you may need to adjust your input accordingly. check sub in the tune in my sig (http://dubstepforum.com/viewtopic.php?t=34765) - the effect was done by applying this to a bass insturment. I sent it to a send and processed the high freqs seperately for the textural portion of the sound. It's a bit ugly though - sort of sloppy - but really dratic and hard at the same time. I love this plug. it's one of my favs.

i really like that one filter that comes with cubase too (can't remember the naem) - it's got saturation in it that's GREAT. I'm starting to use this one a lot! again, check the tune in my sig. the distorted metal guitaresque saw thing was created by using multiple instances of this plug in series. REALLY great shit. very controllable - good for use in areas of the mix that need to be a bit tidier.

For kicks i've been working with some bit crushing. I find it ads texture while maintaining the low freqs. eq and compress and you get a good grimey texture. again, check the new one if you want an example
Image
Decklyn Dublog - Rants, Raves and Tutorials - http://www.decklyn.com
------------------------------------------------------------------------------------------------
http://www.soundcloud.com/decklyn
Mar 18th: Seba Remix
Soundcloud

Locked

Who is online

Users browsing this forum: No registered users and 0 guests