Need advice on laying out dums

hardware, software, tips and tricks
Forum rules
By using this "Production" sub-forum, you acknowledge that you have read, understood and agreed with our terms of use for this site. Click HERE to read them. If you do not agree to our terms of use, you must exit this site immediately. We do not accept any responsibility for the content, submissions, information or links contained herein. Users posting content here, do so completely at their own risk.

Quick Link to Feedback Forum
jeps
Posts: 1
Joined: Wed Mar 19, 2008 11:44 am

Need advice on laying out dums

Post by jeps » Wed Mar 19, 2008 11:49 am

Ez all

I've had a look around but i cant seem to find any advice on drum patterns, does anyone have any advice on placement of drums and snares etc? everything im making at the moment just sounds like dnb @ 130bpm and i think its the drums im going wrong on

User avatar
twitch
Posts: 75
Joined: Fri Jun 29, 2007 7:48 pm
Location: Sydney

Post by twitch » Wed Mar 19, 2008 11:59 am

Start of bar - kick
Middle of bar - snare
Fill in gaps

wub
Posts: 34156
Joined: Tue Feb 26, 2008 3:11 pm
Location: Madrid
Contact:

Re: Need advice on laying out dums

Post by wub » Wed Mar 19, 2008 12:32 pm

JEPS wrote:Ez all

I've had a look around but i cant seem to find any advice on drum patterns, does anyone have any advice on placement of drums and snares etc? everything im making at the moment just sounds like dnb @ 130bpm and i think its the drums im going wrong on

Kick at the start of the bar


The later you leave a snare in the bar, the 'lazier' the tune sounds.


If you fancy a bit of 'randomness', get some bits of paper with 1-3 written on them, then place them face down and pick one at random. That can be how many snares you have in a bar.

Now, get some more bits of paper and write 1-8 of them. For each snare you're going to have in a bar, pick a piece of paper at random and place the snare at that interval within the bar.

i.e.
You pick 2 for the number of snares.
*rustle rustle*
The first snare goes at the 4th interval
*more rustling*
The second snare goes at the 7th interval.

Repeat until you've done enough for a whole tune. Or just do it four times and repeat that drum pattern throughout the whole tune.

If you're handy with the Java, you could even write a little batch file program that runs through the MS-DOS prompt window and tells you how many snares to place, and at what intervals, based on the set parameters discussed above.

Alternatively, just play around until you get something that you like the sound of enough (This method eliminates the wanton use of paper)

User avatar
powerpill
Posts: 1570
Joined: Sat Apr 14, 2007 4:33 pm
Location: NW London

Post by powerpill » Wed Mar 19, 2008 12:42 pm

dear god.

User avatar
vonboyage
Posts: 6736
Joined: Fri Dec 29, 2006 5:18 pm
Location: SMH :: UK
Contact:

Post by vonboyage » Wed Mar 19, 2008 12:54 pm

powerpill wrote:dear god.
Wub you ledge, lol
Origininja

Steve AC23
Posts: 898
Joined: Sun Feb 19, 2006 1:39 pm
Location: melburn ozstrailya

Post by Steve AC23 » Wed Mar 19, 2008 12:54 pm

:lol: :lol: :lol:

User avatar
sines
Posts: 3726
Joined: Sat May 19, 2007 5:41 pm
Location: Houston
Contact:

Post by sines » Wed Mar 19, 2008 12:59 pm

k sn kkkkkkkkkkkkksn k snnn k

serox
Posts: 4899
Joined: Fri Jan 18, 2008 9:17 am
Location: South London

Post by serox » Wed Mar 19, 2008 1:00 pm

When you have finished with all the paper your tune should look like this.

Image
Don’t worry about people stealing an idea. If it’s original, you will have to ram it down their throats.

User avatar
sines
Posts: 3726
Joined: Sat May 19, 2007 5:41 pm
Location: Houston
Contact:

Post by sines » Wed Mar 19, 2008 1:09 pm

:lol:

kato!
Posts: 124
Joined: Sat Feb 16, 2008 2:46 am
Contact:

Post by kato! » Wed Mar 19, 2008 1:59 pm

Do a bit of reverse engineering! As in listen to some of your fav tracks and work out the patterns they have used. Or just do what wub recommended! :-)
It moves you!

User avatar
Sharmaji
Posts: 5179
Joined: Sun Jan 22, 2006 5:03 pm
Location: Brooklyn NYC
Contact:

Post by Sharmaji » Wed Mar 19, 2008 2:25 pm

^ yeah there is always the route of listening to something and trying to re-build (aka 'getting inspiration from') it.

the extent to which this stuff is overthought...... wow.........
twitter.com/sharmabeats
twitter.com/SubSwara
subswara.com
myspace.com/davesharma
Low Motion Records, Soul Motive, TKG, Daly City, Mercury UK

User avatar
djake
Posts: 4314
Joined: Tue Jan 16, 2007 2:03 am
Location: I found my way out of the mine

Post by djake » Wed Mar 19, 2008 2:29 pm

the way i did when i first started was to play a track n sequence the drums over it so they were in time....this was like the first time i ever tried so i could find the bpm of the tracks aswell.

serox
Posts: 4899
Joined: Fri Jan 18, 2008 9:17 am
Location: South London

Post by serox » Wed Mar 19, 2008 2:38 pm

djake wrote:the way i did when i first started was to play a track n sequence the drums over it so they were in time....this was like the first time i ever tried so i could find the bpm of the tracks aswell.
I was thinking bout doing this the other day. There is a tune I really like that has some serious riddim. I been trying to work out what it is that gives it this serious groove!

It is down to the drums for sure so doign what u said would help work it out.

John Locke
Posts: 653
Joined: Thu Nov 23, 2006 10:00 pm
Location: Bottle Bong

Re: Need advice on laying out dums

Post by John Locke » Wed Mar 19, 2008 2:54 pm

JEPS wrote:Ez all

I've had a look around but i cant seem to find any advice on drum patterns, does anyone have any advice on placement of drums and snares etc? everything im making at the moment just sounds like dnb @ 130bpm and i think its the drums im going wrong on
do u like DnB at 130bpm? - if so, whats the problem?

If not, play something you like.

And who cares if its like other dubstep. either u feelin it or yr not. what else matters?

User avatar
djake
Posts: 4314
Joined: Tue Jan 16, 2007 2:03 am
Location: I found my way out of the mine

Re: Need advice on laying out dums

Post by djake » Wed Mar 19, 2008 3:22 pm

Battle Gong wrote:
JEPS wrote:Ez all

I've had a look around but i cant seem to find any advice on drum patterns, does anyone have any advice on placement of drums and snares etc? everything im making at the moment just sounds like dnb @ 130bpm and i think its the drums im going wrong on
do u like DnB at 130bpm? - if so, whats the problem?

If not, play something you like.

And who cares if its like other dubstep. either u feelin it or yr not. what else matters?
:z:

John Locke
Posts: 653
Joined: Thu Nov 23, 2006 10:00 pm
Location: Bottle Bong

Post by John Locke » Wed Mar 19, 2008 3:36 pm

probably the 1st time anyone quoted me for anything other than imaginative foul-mouthed abuse, thanks 8)

brklss
Posts: 622
Joined: Thu Feb 16, 2006 7:47 pm

Post by brklss » Wed Mar 19, 2008 5:14 pm

The snares are not really a problem in dubstep. It's the hihats which can cause headaches as they provide the feeling of pace/speed together with the bassline.

User avatar
addict
Posts: 434
Joined: Sat Nov 10, 2007 4:22 pm
Location: Notts.
Contact:

Post by addict » Wed Mar 19, 2008 9:45 pm

Kato! wrote:Do a bit of reverse engineering! As in listen to some of your fav tracks and work out the patterns they have used. Or just do what wub recommended! :-)
best way IMO. play a track on your media player, then try to copy the beat in your software, easy as pie. try match your tempos and layout then have fun!!

boyd
Posts: 318
Joined: Sat Mar 22, 2008 1:04 pm
Location: ldn/manchester

Post by boyd » Fri Mar 28, 2008 3:26 pm

brklss wrote:The snares are not really a problem in dubstep. It's the hihats which can cause headaches as they provide the feeling of pace/speed together with the bassline.
This.

I've noticed a lot of tunes (more minimal stuff where you can distinctly hear what's seperately going on) seem to use two differently pitched hi-hats that alternate to sound shuffley, if you know what I mean, and a less dramatic snare used sparsely in between the main lazy kick and snare. An easy trick if you haven't worked it out (which to be honest you should have if you're at all serious about producing dubstep) is to stick a smaller snare or hat the 1/16th before the kick or snare so it 'steps', if you get me. For example Benga's Night does this for all four beats in the bar which is part of what makes it so danceable.

But don't get stuck in always having kick on 1 and snare on 3, some tracks work with a kick on every beat, others with a couple big snares, etc. The trick (unless you want proper lazy, spaced out tunes) is to make sure you're nodding your head on all four beats of the bar. Play around with a hat on every quaver (i.e. 8 per bar on the beat) compared to just four but on the off beat, as well as adding in the steppy ones every now and then.

There's often no need to over-complicate things though, one of the my favourite drum tracks is the incredibly simplistic 'V' by Distance. It's a rhythm that could easilly be played by one guy on a real kit, yet it's so banging - check the use of hats and lower velocity kicks in this to make it nice and bouncy.

Also, I once had a four bar drum loop and accidentally moved the sequence one bar to the right for one section, and it ended up nicely varying the drums in a way you wouldn't expect!

cursedc
Posts: 445
Joined: Wed Mar 12, 2008 7:22 am
Location: Los Angeles, CA
Contact:

Post by cursedc » Fri Mar 28, 2008 4:48 pm

howabout Dubstep without the beats. Just movie samples and bass.

That might sound hot.

Locked

Who is online

Users browsing this forum: No registered users and 0 guests