Forum rules
By using this "Production" sub-forum, you acknowledge that you have read, understood and agreed with our terms of use for this site. Click HERE to read them. If you do not agree to our terms of use, you must exit this site immediately. We do not accept any responsibility for the content, submissions, information or links contained herein. Users posting content here, do so completely at their own risk.
I'm getting a massive amount of mains hum through my set up and have dont some research and found this is to do with what's called a earth loop where things are running on different voltages. I'm using a laptop and it's find when it's not plugged in, but hums like an annoying bastard humming a really repetitve tune to drive you mad with the mains in.
In maplins ive found you can get one of these to isolate the hum....
Ok you can get a device called a power conditioner, which will improve power quality and reduce noise greatly. The only downside is that this device is quite expensive, I think around £90. That ground loop isolater is only useful if the noise, is being created by a specific piece of equipment and not your mains supply
it takes the 1/4" TRS jacks, so going to try this out first as it's a bit cheaper and then if that fails i'll look at getting the Phonic PPC
Yeah seems ok for what you need, but it is behringer! They arent the most reliable manufacturer! So be careful. I was thinking that the problem you have may be a result of noise from say the hardrive in your laptop, but to be honest I would need to see/hear it for myself, I'm still sure it's a problem with the mains, as a colleague of mine had exactly the same problem and the power conditioner sorted it, maybe it will for you also, but I can't gaurantee it, sorry.
I'm getting a massive amount of mains hum through my set up and have dont some research and found this is to do with what's called a earth loop where things are running on different voltages. I'm using a laptop and it's find when it's not plugged in, but hums like an annoying bastard humming a really repetitve tune to drive you mad with the mains in.
In maplins ive found you can get one of these to isolate the hum....
The only problem is that this is for phono connections and i'm running monitors straight from the TRS output which are quarter inch jacks.
I knoe you can get converters from phono to 1/4", but would this effect the sound quality?
Can anyone shed any light on the best way to get round this at all? anyone with similar problems?
i would just keep the mains unplugged, but it eats the CPU and the compter can't hack it
word for word. I have exactly the same problem and it's fuckin annoyin. spoken to a number of people abt it and each has given me a different piece of advise. recently looked at these ground loop noise isolators such as the one in maplin. the behringer one also looks quite tidy but I'm reluctant to shell out for sumthin if it don't sort the problem so any feedback from som1 who's used one would b much appreciated.
TEMS wrote:are you using balanced TRS cables? or just standard 1/4" TS cables?
I'm not sure to be honest. One side sounds alright, the other doesn't so i guess it could be one of each! The box i'm getting should convert unbalanced to balanced though so hopefully all will be cool...
Actually, scrap that, it's coming through both again now! I think it could be the hard drive noise as it makes wierd noises when i open pages etc.[/quote]
Last edited by tems on Fri Apr 04, 2008 2:44 pm, edited 1 time in total.
it takes the 1/4" TRS jacks, so going to try this out first as it's a bit cheaper and then if that fails i'll look at getting the Phonic PPC
Yeah seems ok for what you need, but it is behringer! They arent the most reliable manufacturer! So be careful. I was thinking that the problem you have may be a result of noise from say the hardrive in your laptop, but to be honest I would need to see/hear it for myself, I'm still sure it's a problem with the mains, as a colleague of mine had exactly the same problem and the power conditioner sorted it, maybe it will for you also, but I can't gaurantee it, sorry.
Yeah, i could be the hard drive in the laptop. There seems to be a constant high pitched sound coming from somewhere in the laptop when it's not plugged into anything else. Strange that i only get the sound through one speaker when they're plugged in though.
I had good results using the ground loop isolater from Maplins for my old laptop (which also hummed whilst plugged in) - so I reckon its worth a gamble.
Phono to 1/4" converters will reduce quality, but probably not by a noticeable amount.
I got that ground loop isolator from Maplins as i have two outs on my soundcard. Normal phono which goes to my standard amp and speakers and then the TRS out which my monitors and sub are plugged into.
Plugged the ground loop isolator in to the phono loop with my amp and the hum has gone. I have to turn it up really loud to get any kind of hum now, louder than i'd ever want to use it.
So the good news is I've managed to get rid of the hum through one side now i've just got to wait and see if the behringer thing works on the trs side. Lets hope so!
Safe Daft tnuc. I had them plugged into their own power supply and it was still happening.
The behringer HD400 arrived this morning. Plugged it in and simple as that, the hums all gone
So the ground loop isolator from Maplins worked on the phono side and the Behringer is taking care of the TRS inputs and outputs now and my system has no hum anymore
HAPPY DAYS
Cheers for peoples advice on this and hopefully this will be of some use to other people too.
this is only slightly related but thought i might just add it on here rather than starting a whole new thread
in drunken retardness i've managed to rip out the earth cord from one of my technics 1200s and i was wondering if anyone knows how to reattach it. i've tried google searching and come up with nothing. i remember there was an online guide for things like because i used it when the power switch broke, but i can't remember where it is or find it with a search
now i've just got to wait and see if the behringer thing works on the trs side. Lets hope so!