Page 7 of 9

Re: How to make this Sound December 2012

Posted: Tue Dec 18, 2012 11:40 pm
by mthrfnk
dotcurrency wrote:
mthrfnk wrote:
dotcurrency wrote:Guys guys guys, how do you get a good sounding sidechaining piano? Like when I do it, it does not sound as smooth as I would like it.

PRIME example @3.31 (pretty much the end of the song, its NOT in the beginning):
How are you doing it?

In FL, with peak controller. I turn down the decay so its a little slower, and i turn down the tension, so it sounds more like a slow moving LFO kind of, but it sounds, abrupt and...nasty.
Two things to try, try using the FL Limiter to sidehain and play with the attack and release settings, I can get this sounding quite nice.
Alternatively, just draw in the volume automation manually for like 4 kicks, then just copy/paste it :lol:
Could also use GrossBeats sidechaining function but I have mixed opinions on that.

Re: How to make this Sound December 2012

Posted: Tue Dec 18, 2012 11:45 pm
by IamDroid
blinkesko wrote:Here it is :) Wasn't that similar, but a bit. Some processing will get you there I think.
http://www.mediafire.com/?hyni2omg6aamjnm
:W:
Thanks Man appreciate it lots. I'll dick around with it tomorrow to see if I can get it close enough

Re: How to make this Sound December 2012

Posted: Tue Dec 18, 2012 11:48 pm
by P-255
mthrfnk wrote:
dotcurrency wrote:
mthrfnk wrote:
dotcurrency wrote:Guys guys guys, how do you get a good sounding sidechaining piano? Like when I do it, it does not sound as smooth as I would like it.

PRIME example @3.31 (pretty much the end of the song, its NOT in the beginning):
How are you doing it?

In FL, with peak controller. I turn down the decay so its a little slower, and i turn down the tension, so it sounds more like a slow moving LFO kind of, but it sounds, abrupt and...nasty.
Two things to try, try using the FL Limiter to sidehain and play with the attack and release settings, I can get this sounding quite nice.
Alternatively, just draw in the volume automation manually for like 4 kicks, then just copy/paste it :lol:
Could also use GrossBeats sidechaining function but I have mixed opinions on that.
For a good feeling sidechain in FL limiter -36 Treshold and 4.1:1 ratio is usually the rule of thumb.

Re: How to make this Sound December 2012

Posted: Tue Dec 18, 2012 11:52 pm
by Augment
You could also try automating the volume of the piano

Re: How to make this Sound December 2012

Posted: Wed Dec 19, 2012 12:34 am
by dotcurrency
P-255 wrote:
mthrfnk wrote: For a good feeling sidechain in FL limiter -36 Treshold and 4.1:1 ratio is usually the rule of thumb.

Thank you everyone who helped me! I never even knew about sidechaining with the limiter, well its now my new favourite thing hahah.

I like these settings the most, thanks, definitely the desired sound from them. :W:

Re: How to make this Sound December 2012

Posted: Wed Dec 19, 2012 1:10 am
by Sechah
Does anyone know how to get something like the synth in the intro of this song?: (It's in the whole song but alone in the intro)



Is it some sort of backwards violin put through a granulizer or something? I have now where to start haha thanks in advance.

Re: How to make this Sound December 2012

Posted: Wed Dec 19, 2012 1:25 am
by P-255
Sechah wrote:Does anyone know how to get something like the synth in the intro of this song?: (It's in the whole song but alone in the intro)

Is it some sort of backwards violin put through a granulizer or something? I have now where to start haha thanks in advance.
Hmm, I would try a reversed organ or violin, with tight reverb, a granulizer, and a HP filter.

Re: How to make this Sound December 2012

Posted: Wed Dec 19, 2012 1:27 am
by Genevieve
This one is ludicrously simple but I just can't get it right. Its the bass sound. Sounds like a pitched distorted 808 kick with the highs en some mids heavily scooped out...



You first hear it at 0:57 but get to hear it better at 2:03

It's really heavy, but I can't get it right at all o.O Mine just sounds rrrly silly

Re: How to make this Sound December 2012

Posted: Wed Dec 19, 2012 1:31 am
by Hircine
Distort an 808 until you get the base sound, load two copies of it into a sampler, add an envelope to the pitch of one of the samples and mess around so you get just a bit of phasing, bounce it, load it again and set a loop on the tail region or stretch. Hope it works.

Re: How to make this Sound December 2012

Posted: Wed Dec 19, 2012 1:32 am
by dotcurrency
Genevieve wrote:This one is ludicrously simple but I just can't get it right. Its the bass sound. Sounds like a pitched distorted 808 kick with the highs en some mids heavily scooped out...



You first hear it at 0:57 but get to hear it better at 2:03

It's really heavy, but I can't get it right at all o.O Mine just sounds rrrly silly
Tbh sounds like a distorted 808, but layered with a reese to me, thats probably really low, with some "pluck like" properties, phased a lot, and gliding down.

Re: How to make this Sound December 2012

Posted: Wed Dec 19, 2012 1:35 am
by Genevieve
@Hircine: AH!! Hhaha. I stretched one once and completely phased one once, but never thought of just subtly doing both.

>.> To the lab! Thanks.

@ dotcurrency I heard a reese in there too kind of, but I think it might be the phasing of a distorted 808. It does have that reese growl to it, but the attack just sounds too much like a distorted 808 to me. Especially at the 2:03 point. The attack sounds 808'y, the tail sounds reesy.

Re: How to make this Sound December 2012

Posted: Wed Dec 19, 2012 1:39 am
by skimpi
yeah liek they said try and like get phasing, like maybe have two instances of the sampler ( if its a sample) and like change a few cents on each pitch, and also maybe try some resonance on one of the, or both, or at different points, or maybe get an EQ with a big peak, so kinda simialr to resonance really.

Re: How to make this Sound December 2012

Posted: Wed Dec 19, 2012 1:46 am
by Hircine
Genevieve wrote:@Hircine: AH!! Hhaha. I stretched one once and completely phased one once, but never thought of just subtly doing both.

>.> To the lab! Thanks.

@ dotcurrency I heard a reese in there too kind of, but I think it might be the phasing of a distorted 808. It does have that reese growl to it, but the attack just sounds too much like a distorted 808 to me. Especially at the 2:03 point. The attack sounds 808'y, the tail sounds reesy.
It sounds really warm so I would say a straight out of the box 808 sampled into an emu or an analogue saw wave -> emu overdrived with a nice scoop in the 200~500hz range

Re: How to make this Sound December 2012

Posted: Wed Dec 19, 2012 1:59 am
by Genevieve
Well, this has turned out to be a pretty interesting sound to people :p I've actually gotten sort of close to the vibe, but then I distorted and timestretched the whole thing and it sounded BRUTAL. Unlistenable noise to most prob's, but I think it could fit my tune haha.

Thanks to everyone for helping btw

Re: How to make this Sound December 2012

Posted: Wed Dec 19, 2012 12:00 pm
by vault
Hey guys!
Seems like Eptic Bass is quit trendy right now, and I found them very interesting, so I was wondering how to *fully* create these things:

It's at 1:09, and I think it's LFO'd or something.


And throughout the whole this song after 0:20.

Re: How to make this Sound December 2012

Posted: Thu Dec 20, 2012 9:04 pm
by Living_Tragedy
Right, I need this bass.



The one at 1:21 and again at 1:38. The really crisp bass that sounds orgasmic and gorgeous and sexy and ahhhhhhh! I don't even know where to start with it...

How to get this brass sound?

Posted: Sat Dec 22, 2012 3:00 pm
by neoking
Hey all,

I was wondering how to get this 'big room' brass sound. It seems to be some kind of soundfont or preset, given the fact that this sound is used by several producers and sounds so identical.
But if so, where the hell can I find it?


(Leadsound of almost the whole track)



(sound starting at 0.57)

Re: How to make this Sound December 2012

Posted: Sat Dec 22, 2012 6:50 pm
by Slizmon
vault wrote:Hey guys!
Seems like Eptic Bass is quit trendy right now, and I found them very interesting, so I was wondering how to *fully* create these things:

It's at 1:09, and I think it's LFO'd or something.


And throughout the whole this song after 0:20.
I made that bass with osc1 on -24 sine square and osc2 24 sine square
with scream filter and some envelopes

Re: How to make this Sound December 2012

Posted: Sat Dec 22, 2012 6:59 pm
by Augment
^Try some waveshaping with that aswell. Alot of waveshaping

Re: How to get this brass sound?

Posted: Sat Dec 22, 2012 10:56 pm
by skimpi
I mean to me it sounds like its just a pitched down sample from a stock brass sample bank, either logic esx24 or maybe kontakt, like if you open a brass horn preset and just play some lower notes, maybe even layer some higher and lower ones. Or it could be from a synth like the yamaha M1 maybe cos hudson does use some classic 80s synth sounds aswell like from that synth.