Dubstepforum.com

Posted: **Fri Dec 12, 2008 12:22 pm**

Split your basslines into 3 different channels using a splitter - eq each channel so that one emphasises the highs, another the mid and another the low. You can then control each part of the sound seperately, applying different effects to different frequencies. This is something i have found is unbelievably effective for making a pretty static bassline sound a bit more offensive.

Posted: **Fri Dec 12, 2008 12:39 pm**

dont start a tune but then not hear it n turn it all the way up and then realise ur mixer aint on and turn it on, without turning the music down, and have a fat sound turd blast ur ears off

Posted: **Fri Dec 12, 2008 12:44 pm**

R wrote:try to seperate your stereo channel into 2 mono channels. pan them and eq the 2 channels seperatly. this gives you a weird new dimension in ur mix. Give L bit more mid and R some high etc. be creative with the knobs so both mono channels eq'd different.

not sure about this one tbh

Posted: **Fri Dec 12, 2008 1:56 pm**

R wrote:try to seperate your stereo channel into 2 mono channels. pan them and eq the 2 channels seperatly. this gives you a weird new dimension in ur mix. Give L bit more mid and R some high etc. be creative with the knobs so both mono channels eq'd different.

I have tried this before, but generally it depends on the type of sound you're going for... if you want a pounding bass sound, I don't think panning mids will help tbh..

Posted: **Fri Dec 12, 2008 2:10 pm**

if you're in logic, the compressors have a built in wet/dry balance control - instant parallel compression!

also try the adaptive limiter on your drum buss - very handy.

Posted: **Fri Dec 12, 2008 2:14 pm**

If you're a logic noob such as myself, take advantage of the buses and set up your reverbs etc on buses rather than the actual channels. So you can regulate how much reverb is actually used!

Posted: **Fri Dec 12, 2008 2:21 pm**

ctrl-s or apple-s everytime you change something that you like. or every 2 min whichever comes first.

Posted: **Fri Dec 12, 2008 2:26 pm**

james fox wrote:
R wrote:try to seperate your stereo channel into 2 mono channels. pan them and eq the 2 channels seperatly. this gives you a weird new dimension in ur mix. Give L bit more mid and R some high etc. be creative with the knobs so both mono channels eq'd different.
not sure about this one tbh

it's more a masterings trick. Like when youre mastering ur stuff parralel then you can use that kinds of stuff to add a new dimension. This kinda stuff works really great with analoge mixers and stuff tho u can try it software ofcourse.

another funny thing u can try is to delay your sidechain signal. like a pad gets a whole new groove pattern because of the delayed sidechain etc.

Posted: **Fri Dec 12, 2008 3:06 pm**

justrob wrote:ctrl-s or apple-s everytime you change something that you like. or every 2 min whichever comes first.

Mate i do it literally every 1 minute ever since I lost a track I worked for 4 hours on

Posted: **Fri Dec 12, 2008 3:16 pm**

TEQH wrote:
justrob wrote:ctrl-s or apple-s everytime you change something that you like. or every 2 min whichever comes first.

Mate i do it literally every 1 minute ever since I lost a track I worked for 4 hours on

It's like heartbreak that. Loosing a heavy track like that... disgusting. Absolutely sickening. Deep sickness too not no miner shit.

Posted: **Fri Dec 12, 2008 3:19 pm**

manray wrote:
TEQH wrote:
justrob wrote:ctrl-s or apple-s everytime you change something that you like. or every 2 min whichever comes first.

Mate i do it literally every 1 minute ever since I lost a track I worked for 4 hours on

It's like heartbreak that. Loosing a heavy track like that... disgusting. Absolutely sickening. Deep sickness too not no miner shit.

The worst was when my old PC died, I powered it up one day and heard a "pop", then looked tward the back of the machine and saw a lil wisp of smoke rising... had everything I had made in my first two years of producing. Thank god it was only the power supply that went out.

Posted: **Fri Dec 12, 2008 6:07 pm**

Syneth1 is deffo worth checking out

Posted: **Fri Dec 12, 2008 6:28 pm**

Bass is bigger if it's a mono track

Posted: **Fri Dec 12, 2008 7:26 pm**

When you finish your track and before you start the final mixing session, take some time and rest, day or two.

Right before mixing listen your favorite, professionally mixed and mastered music (it is better if it is same style) with low or middle levels with monitors you are planning to use to mix your track. And then listen your track and make ca 40 min mixing session. If no success, then just think, leave it and repeat the above. If you are satisfied, listen your track with headphones, hi-fi system, in the car etc. Make necessary changes. Take limiter plugin and push the volume up:)

Posted: **Fri Dec 12, 2008 8:43 pm**

For some subtle to extreme stereo fx try a using a mid side decoder-encoder. Now you have one channel with the sum of both left and right. And one channel encoded with the difference. So now you can process the centre of the stereo field with out affecting the left and right. Or you can mess around with the left and right and not the centre.

http://www.voxengo.com/product/msed/ vst insert two in a channel. Set the first to encode. Then apply fx separately to each side of the stereo channel. Then place one to decode it back into normal stereo

Posted: **Fri Dec 12, 2008 8:50 pm**

kidlogic wrote:Remember that its easier to organize well from the begining than to try to re-organize a 250gb hd when you begin to run out of room. (Yes, I speak from experience)

Word on that! Took me ages to sort the stuff! Sheesh!

Posted: **Fri Dec 12, 2008 9:08 pm**

Keggah wrote:Dont eat yellow snow

This really helped when i was bangin out a good subbass erlier

Posted: **Fri Dec 12, 2008 10:00 pm**

One Tip

Templates...

always have a template with a nice drum kit and some nice drum sounds always good if ur stuck and want to get the ball rolling helped me a few times when i cant think of anythink

i got a cubase & reason rewire template with 2 redrum kits nice sub bass and a basic wobble (not all my track have wobbles) albino,blue and a few effects plugins works a treat

but dont always use the same template thou will bore the fuck out of you

oh and also lil redrum tip i like to have each of my drums on there own mixer channel so i can sub mix each one seperatele.

E.g

[/img]

Posted: **Fri Dec 12, 2008 10:22 pm**

How to get super fat drums in Logic Pro!!!!!

Step 1,
Get 3 Kicks and a closed Hi Hat
Step 2,
Layer them up so they all play at once, make sure they all begin at the same point to to millisecond!
Step 3,
Remove unwanted frequency's from thee hits, using EQ, high pass & low pass. adjust their volume levels to sound good
Step 4,
On the master channel add an EQ, that has a high pass on 48Db/oct set to 90 Hz.
Then add the Sub Bass plugin and set it to 'deep club kick'
Then add the Bass Amp, plugin and set to 'Top Class DI Warm' adjust output to 0 Db.
Then add the gain plugin, and set the mix to 'mono' nobody wants a kick drum in stereo, YUK!
Finally add the standard compressor (second one down in dynamics) and select 'kick drum compression' then set the circuit type to 'ClassA_U'
Now adjust the master fader so that when played the drum hit comes in at around 0.0 Db without showing up in the red. Otherwise you'll end up with a digitally distorted drum hit. When rendering do not select normalize.

And that is how to get fat drums in logic pro 8!

Dubstepforum.com

The Friday Share A Production Tip Thread™