outdropt wrote:Hey guys, wondering if you have seen this before. I'm using Ableton (obviously) but the issue usually happens in my massive patches, i haven't tried to replicate outside of that yet.
What will happen is if i'm playing through a song and stop the song after a midi note is triggered but before the midi note is finished playing, the note will continue to play (at least until i hit play and trigger another note in the patch) This only happens in my basses when I have my keyboard mapped to the patch.
I was thinking that maybe my midi keyboard is not sending a note end message. But I can play on the keyboard and it will glide to whatever note i select, when the key is released it will go back to the note that it was originally stuck on (until i hit THAT note)
Anyone see this before?
its just affecting playback in the dAW right? not the actual exported version. its just a daw thingm it did it in FL too. just double click stop in ableton or hit the panic button in massive
Re: The Ableton Q&A Thread
Posted: Sun Feb 24, 2013 3:19 pm
by shakas
I've got a very simple question I've been wondering about. Is there a shortcut that brings the loop brace into view but without looping it.
I've been using CONTROL+L and its helpful ... but i don't always need it to turn the loop on.
and yeah..its very simple just to turn the loop off after...but i'd rather not have to if the option is available.
thanks.
Re: The Ableton Q&A Thread
Posted: Sun Feb 24, 2013 3:35 pm
by PillowFight
I've been using Ableton Live for a simple DJ-esque set up with an APC40, and up until recently I've been just using 4 audio strips, one sent to A and one sent to B, then 2 other ones for hold extra tracks, but recently I purchased a soundcard so I could preview tracks before playing them, but I have no idea on how to go about setting this up to work in tangent with my APC40 etc. etc. etc.
would anyone know how to do this?
Re: The Ableton Q&A Thread
Posted: Mon Feb 25, 2013 10:02 am
by RandoRando
PillowFight wrote:I've been using Ableton Live for a simple DJ-esque set up with an APC40, and up until recently I've been just using 4 audio strips, one sent to A and one sent to B, then 2 other ones for hold extra tracks, but recently I purchased a soundcard so I could preview tracks before playing them, but I have no idea on how to go about setting this up to work in tangent with my APC40 etc. etc. etc.
would anyone know how to do this?
you need at least 4 outputs, unless you want to DJ * cue in dual mono then watch this
Re: The Ableton Q&A Thread
Posted: Fri Mar 01, 2013 2:08 pm
by PillowFight
RandoRando wrote:
PillowFight wrote:I've been using Ableton Live for a simple DJ-esque set up with an APC40, and up until recently I've been just using 4 audio strips, one sent to A and one sent to B, then 2 other ones for hold extra tracks, but recently I purchased a soundcard so I could preview tracks before playing them, but I have no idea on how to go about setting this up to work in tangent with my APC40 etc. etc. etc.
would anyone know how to do this?
you need at least 4 outputs, unless you want to DJ * cue in dual mono then watch this
Thanks so much! I have exactly 4 outputs lol this should work out
Re: The Ableton Q&A Thread
Posted: Mon Mar 04, 2013 5:57 pm
by OfficialDAPT
Upgrading to suite 9 tomorrow
Re: The Ableton Q&A Thread
Posted: Wed Mar 06, 2013 5:34 pm
by topmo3
ey yo what's the best / easiest way to transpose audio without it slowing down or speeding up u kno?
Re: The Ableton Q&A Thread
Posted: Wed Mar 06, 2013 6:16 pm
by OfficialDAPT
topmo3 wrote:ey yo what's the best / easiest way to transpose audio without it slowing down or speeding up u kno?
Drop it in simpler or sampler and then your can pitch it up or down
Re: The Ableton Q&A Thread
Posted: Wed Mar 06, 2013 6:56 pm
by Big MD
topmo3 wrote:ey yo what's the best / easiest way to transpose audio without it slowing down or speeding up u kno?
cklick on the desired audio clip, make the audiocuve visible on the under bar, you should find a knob on the lefthandside saying pitch.
cheers.
Re: The Ableton Q&A Thread
Posted: Wed Mar 06, 2013 6:56 pm
by Big MD
OfficialDAPT wrote:
topmo3 wrote:ey yo what's the best / easiest way to transpose audio without it slowing down or speeding up u kno?
Drop it in simpler or sampler and then your can pitch it up or down
it makes it slower or faster.
Re: The Ableton Q&A Thread
Posted: Wed Mar 06, 2013 7:04 pm
by topmo3
Big MD wrote:
topmo3 wrote:ey yo what's the best / easiest way to transpose audio without it slowing down or speeding up u kno?
cklick on the desired audio clip, make the audiocuve visible on the under bar, you should find a knob on the lefthandside saying pitch.
cheers.
thanks man i think i know that already was looking for an even simpler solution cause for example in reaper u can just right click and pitch down or up but yeah cheers anyway man
Re: The Ableton Q&A Thread
Posted: Wed Mar 06, 2013 7:53 pm
by RmoniK
ey yo u kno.
Just go inside the sample and change the "transpose" knob. It can hardly get more simple than that.
Re: The Ableton Q&A Thread
Posted: Wed Mar 06, 2013 8:54 pm
by Perej
Big MD wrote:
topmo3 wrote:ey yo what's the best / easiest way to transpose audio without it slowing down or speeding up u kno?
cklick on the desired audio clip, make the audiocuve visible on the under bar, you should find a knob on the lefthandside saying pitch.
cheers.
Sorry, whats the "audiocuve"? Wheres the 'underbar'? Is this in live 9 only? can see the repitch option in warping but dunno what else you might mean?
Re: The Ableton Q&A Thread
Posted: Thu Mar 07, 2013 3:45 pm
by charles1
so who's got live 9? i just downloaded in on tuesday, and is it just me or are there WAY less instruments than in live 8? am i missing something?
i have live, not suite. literally there were like 5 different categories of "guitar and plucked" (i think it was synthetic, acoustic, electric, lead, and world and ethnic). now, there are like 10 in total. Bullshit! Am I missing something? please help!
Re: The Ableton Q&A Thread
Posted: Thu Mar 07, 2013 8:09 pm
by OfficialDAPT
charles1 wrote:so who's got live 9? i just downloaded in on tuesday, and is it just me or are there WAY less instruments than in live 8? am i missing something?
i have live, not suite. literally there were like 5 different categories of "guitar and plucked" (i think it was synthetic, acoustic, electric, lead, and world and ethnic). now, there are like 10 in total. Bullshit! Am I missing something? please help!
I haven't really noticed any less instruments but I never really used the stock ones too much. I guess it depends on which version of live 8 you had and which version of live 9 because some come with more stock sounds. You may be able to download more off the ableton site just look at "my account."
Re: The Ableton Q&A Thread
Posted: Thu Mar 07, 2013 8:35 pm
by topmo3
RmoniK wrote:ey yo u kno.
Just go inside the sample and change the "transpose" knob. It can hardly get more simple than that.
Umm dunno which version you're using, wiseass but that particular knob changes the sample length and playback speed unlike requested. But i got it now so it's cool. i made it an envelope and now it works
Re: The Ableton Q&A Thread
Posted: Thu Mar 07, 2013 10:05 pm
by RmoniK
It does not change the length or speed if warp is turned on. Else it would be kinda lame to even have such a knob.
Re: The Ableton Q&A Thread
Posted: Fri Mar 08, 2013 3:25 pm
by charles1
@topmo3 - would the pitch MIDI effect be what youre looking for?
Re: The Ableton Q&A Thread
Posted: Sun Mar 10, 2013 1:06 pm
by RandoRando
topmo3 wrote:ey yo what's the best / easiest way to transpose audio without it slowing down or speeding up u kno?
any of the warping algorithms except re pitch and beats.
Re: The Ableton Q&A Thread
Posted: Mon Mar 11, 2013 11:13 pm
by 5415
Just wondering if anyone knows a way of randomising velocity on hihats in a midi clip thats quicker than painstakingly editing or copy-pasting each one?
