Page 3 of 7

Re: Printing stuff

Posted: Mon Mar 18, 2013 6:36 pm
by lovelydivot
it sounds - so so dry
all electronic devices will be sealed inside of bags filled with conductive plasma...

Image


Black people have to spend a large portion of their day in pressurized mineral baths
or else their eyes turn blue and they lose their sense of pretty much everything.
An entire mixed race of people has emerged to tend exclusively to this branch of our culture...
People decended from ancient families with an instictual almost telepathic ability to cultivate
the coconut palm, shea nut, avacado, and olive tree in fiercly protected and precariously balanced bio-regions.

They are called - Dominicans

Re: Printing stuff

Posted: Mon Mar 18, 2013 7:22 pm
by lovelydivot
Image

White people are prohibited from using the baths because
they spontanously develop all kinds of bizarre and uncontrollable super abilities
Like phasing in and out of existence at any given time or spot in particular...origin of the humorous phrase
"So -Where you at" - commonly found in music appreciated by delinquents
or more commonly - becoming sentient with the entire population for extended periods of time
and eventually - vegetarianism.

It has not been determined if Black people suffer from these super abilities as they are mostly secretive.
Vegetarianism has been documented.

Re: Printing stuff

Posted: Tue Mar 19, 2013 1:26 am
by lovelydivot
In case you haven't figured it out....

I am cracking myself up at this point...



You know I'm the first one to go jump in a prohibited mineral bath...
and end up spending the next 4 years trying to figure out what the fuck just happened..

Re: Printing stuff

Posted: Tue Mar 19, 2013 1:55 am
by dickman69
bm quit being racist

Re: Printing stuff

Posted: Tue Mar 19, 2013 2:16 am
by lovelydivot
starts fighting - breaks free and runs out back entrance

Re: Printing stuff

Posted: Tue Mar 19, 2013 2:30 am
by lovelydivot
I try to imbue a people with superabilities - get accused of segregation

hate all of you

Re: Printing stuff

Posted: Tue Mar 19, 2013 2:47 am
by lovelydivot
Image


un-huh

Re: Printing stuff

Posted: Wed Mar 27, 2013 12:33 am
by alphacat
[long record pull-up scratch]

3D Printed Guns (Documentary)


and

Your 3D Printer Could Eat Empty Milk Jugs Instead of Expensive Plastic

-q-

Re: Printing stuff

Posted: Wed Mar 27, 2013 1:05 am
by incnic
retarded fake marketiung shite
i dont want a fucking plastic gun
andyway its ony;l tye cartidge thing
and it cracks cos its made for printint WOW figures not guns

Re: Printing stuff

Posted: Wed Mar 27, 2013 1:53 am
by lovelydivot
WOW - no paranoid grandiose delusional egotistical sociopathic tendencies there... :x



That just goes to prove that a person can be decently intelligent and still be completely retarded.

Re: Printing stuff

Posted: Wed Mar 27, 2013 2:54 am
by dickman69
printing guns is pretty badass tbh

Re: Printing stuff

Posted: Wed Mar 27, 2013 6:47 pm
by alphacat
incnic wrote:retarded fake marketiung shite
i dont want a fucking plastic gun
andyway its ony;l tye cartidge thing
and it cracks cos its made for printint WOW figures not guns
Glock 23's are made of plastic and they'll drill a hole in yr skull just fine.

Re: Printing stuff

Posted: Wed Mar 27, 2013 7:41 pm
by DRTY
knell wrote:
Terpit wrote: It seems pretty interesting, but im not sure what the implications are, printing all our food? or even all household goods, only having to shop for whatever material the printers need?
household goods? there's already plans to make houses themselves 3D printable. if it becomes practical and commercialized then it would be the next big thing, but it wouldn't exactly be the star trek replicator
u cant print a house m8

Re: Printing stuff

Posted: Wed Mar 27, 2013 7:48 pm
by alphacat
DRTY wrote:
knell wrote:
Terpit wrote: It seems pretty interesting, but im not sure what the implications are, printing all our food? or even all household goods, only having to shop for whatever material the printers need?
household goods? there's already plans to make houses themselves 3D printable. if it becomes practical and commercialized then it would be the next big thing, but it wouldn't exactly be the star trek replicator
u cant print a house m8
Image

http://www.treehugger.com/green-archite ... strip.html

http://www.gizmag.com/kamermaker-3d-pri ... use/26752/

http://www.dezeen.com/2013/03/09/amster ... ted-house/

http://www.dezeen.com/2013/02/13/protoh ... ll-design/

http://mhl.nu/printed-house.html

Re: Printing stuff

Posted: Wed Mar 27, 2013 7:48 pm
by DRTY
alphacat wrote:
DRTY wrote:
knell wrote:
Terpit wrote: It seems pretty interesting, but im not sure what the implications are, printing all our food? or even all household goods, only having to shop for whatever material the printers need?
household goods? there's already plans to make houses themselves 3D printable. if it becomes practical and commercialized then it would be the next big thing, but it wouldn't exactly be the star trek replicator
u cant print a house m8
Image

http://www.treehugger.com/green-archite ... strip.html

http://www.gizmag.com/kamermaker-3d-pri ... use/26752/

http://www.dezeen.com/2013/03/09/amster ... ted-house/

http://www.dezeen.com/2013/02/13/protoh ... ll-design/

http://mhl.nu/printed-house.html
I WONT HAVE A FUCKING JOB

Re: Printing stuff

Posted: Wed Mar 27, 2013 7:50 pm
by alphacat
It's already happening...

http://www.treehugger.com/slideshows/gr ... ity-facit/

Time for you to brush up on your CAD/CAM skills son. ;)

Re: Printing stuff

Posted: Wed Mar 27, 2013 7:53 pm
by DRTY
Image

Re: Printing stuff

Posted: Thu Mar 28, 2013 4:17 pm
by lovelydivot
This is what is going to happen...

Just like contemporary architecture
whose main purpose was to write a streamlined production into the design...
and make use of pre-fab materials to bring down the cost...to make it affordable to everyone...
and what happens to it? exactly the opposite...ends up being strictly for the uber wealthy.

At first everyone is excited to jump on the novel idea -
soon everyone is building their little ikea snap-lock houses...
real builders and their art isn't needed in great numbers - as modular factories have all the business...

the art is lost on a wide swathe of people

- then the modular factory - with no competition - starts to drive the price back up

and all of the money goes to the ..."1%" - FACTORY BORG

All regular jacks end up standing on a production line screwing in a single screw - 12 hour shifts
- getting paid minimun - no chance of ever learning it or owning it.


I really have a venoumous amount of cynicism when it comes to money
and how people are engineering to get it all.

proprietary technology is one way...

Re: Printing stuff

Posted: Thu Mar 28, 2013 4:29 pm
by frank grimes jr.
http://www.gizmag.com/burritobot-burrito-printer/23026/

Only reason I see a need for 3D printing.

Re: Printing stuff

Posted: Thu Mar 28, 2013 4:40 pm
by lovelydivot
seriously

If you want to learn how to build a house...learn how to use a circular saw and routers...

you don't need to pay for a special school to learn and have access to - a large scale cnc milling machine...



I fought this all the way through school - I don't trust this - people...

They will let you do it for a large sum of money and stay on top - by obsolescing the tools we have now.

I've stood next to these machines in the industrial design lab
- and I felt like satan was trying to get me to gamble me on the super big dream.

Breeding a taste for luxury goods.

maybe they were trying to help me be employed or something - in service to the king or whoever has money...


Fuck them and their boats.