Cubase Cracking and Popping.
Posted: Wed Mar 16, 2011 12:14 pm
OK, so I had this problem where cubase would crack and pop after about 5mins of use and it was doing this even if I only had 1 track of audio. I could rule out that it wasn't my pc, considering its very high end and after googling around, and reading other forum posts, the problem seemed unique to me. I could kinda fix the problem if I closed cubase everytime it started doing this and then reopening it, having another 5mins of clear audio. But as you can imagine, this was bloody annoying.
Anyway, the point of this is, I managed to fix it, and I thought I should post it here, considering I found this advice no where else. It's a simple fix and was probably down to me being an idiot.
If cubase has a sample rate of 44.1 khz, then you have just got to make sure that this matches up to the sample rate on your soundcard.
Hope this helps anyone.
Anyway, the point of this is, I managed to fix it, and I thought I should post it here, considering I found this advice no where else. It's a simple fix and was probably down to me being an idiot.
If cubase has a sample rate of 44.1 khz, then you have just got to make sure that this matches up to the sample rate on your soundcard.
Hope this helps anyone.