Dubstepforum.com

Okay pretty much problem is that whenever i load up Massive in FL it seems that the plug-in wrapper crashes after a few minutes. Using FL 10 on Win 7 64bit. Anyone else successfully using this combo on Win7 64bit? And the software MAY be cracked versions although i do not encourage this. Can anyone point me in the right direction if they are successfully using this combo? PM me if you would like to avoid the qq.

Edit: I usually do troubleshoot my own problems and have been very successful in doing so in the past but no matter what i try this time their is no avail.

lol, you'd probably avoid those issues by buying the software

If you're not going to buy it, at least read your download instructions.

Read the rules > http://www.dubstepforum.com/viewtopic.php?f=8&t=177663
If you're not smart enough to trouble shoot your own problems maybe its time you started buying your software

Edited.
I would like to buy the software if I was in the position to do so but it is quite hard to do on a Trainee wage of $10/hr. $600 of software is pretty much my fortnightly pay. Just thought you guys would be nice enough to help me out with a small problem that i thought other people might be experiencing as well. I really want to get deeper into production and as I've just started to have a good understanding of Massive and FL, this is an annoying situation. If i had cash to buy it, i would. Sorry that I am "not smart enough" to troubleshoot this problem. Infact no I'm not, because I probably could fix the issue I am having after playing around with some re-installs etc but I just thought someone may have already had the same problem and could provide some insight. Sorry if I have gone about this in the wrong way.

buy the synth or pirate it better.

or get a better pirated version of the software. works in 3 ways sir

BevOh wrote:Edited.
I would like to buy the software if I was in the position to do so but it is quite hard to do on a Trainee wage of $10/hr. $600 of software is pretty much my fortnightly pay. Just thought you guys would be nice enough to help me out with a small problem that i thought other people might be experiencing as well. I really want to get deeper into production and as I've just started to have a good understanding of Massive and FL, this is an annoying situation. If i had cash to buy it, i would. Sorry that I am "not smart enough" to troubleshoot this problem. Infact no I'm not, because I probably could fix the issue I am having after playing around with some re-installs etc but I just thought someone may have already had the same problem and could provide some insight. Sorry if I have gone about this in the wrong way.

Trust me. This is something you can't solve yourself. Open the .NFO file in notepad. scroll down. Your answers shall be provided.

zerbaman wrote:

BevOh wrote:Edited.
I would like to buy the software if I was in the position to do so but it is quite hard to do on a Trainee wage of $10/hr. $600 of software is pretty much my fortnightly pay. Just thought you guys would be nice enough to help me out with a small problem that i thought other people might be experiencing as well. I really want to get deeper into production and as I've just started to have a good understanding of Massive and FL, this is an annoying situation. If i had cash to buy it, i would. Sorry that I am "not smart enough" to troubleshoot this problem. Infact no I'm not, because I probably could fix the issue I am having after playing around with some re-installs etc but I just thought someone may have already had the same problem and could provide some insight. Sorry if I have gone about this in the wrong way.

Trust me. This isn't something you can't solve yourself. Open the .NFO file in notepad. scroll down. Your answers shall be provided.

Even though I have already looked at these things, this is the more helpful kind of answers i was looking for. Thankyou.

BevOh wrote:Edited.
I would like to buy the software if I was in the position to do so but it is quite hard to do on a Trainee wage of $10/hr. $600 of software is pretty much my fortnightly pay. Just thought you guys would be nice enough to help me out with a small problem that i thought other people might be experiencing as well. I really want to get deeper into production and as I've just started to have a good understanding of Massive and FL, this is an annoying situation. If i had cash to buy it, i would. Sorry that I am "not smart enough" to troubleshoot this problem. Infact no I'm not, because I probably could fix the issue I am having after playing around with some re-installs etc but I just thought someone may have already had the same problem and could provide some insight. Sorry if I have gone about this in the wrong way.

Cut your losses and just stick to FL then. I have heard some amazing things done with 3xOSC. Learn the tools you have access to rather than getting other software. Or if you're on a budget, get Reaper ($40 for a personal license), and you've got all the power you need and you won't get shut down again

In regards to your problem - people -HAVE- helped you. Those kinds of issues are generally due to cracked shit

I know they are generally due to cracked shit but i was just wondering if anyone had similar issues that they had fixed, because i think we all know that not everyone has paid software

BevOh wrote:I know they are generally due to cracked shit but i was just wondering if anyone had similar issues that they had fixed, because i think we all know that not everyone has paid software

Yup, this is true - but that doesn't make our points any less valid

Yeah I guess its kinda a lost hope expecting to get no replies along the lines of "Buy the software ya poor tnuc" haha

Op I undersTnd I have a minimum wage job as well and can't afford all the shut I have in anmillion years. I have the same setup as u. Win 7 64 bit and fl 10 and I have massive. It sounds like u just have to delete your database file. My computer , "your username on windows" , appdata (enable hidden folders),local, native instruments, massive and delete the database file. I can no longer assist you, the FBI is monitoring this thread

This forum is not allowed to encourage the use of cracked software in anyway. Helping someone fix an issue that would enable them to use said cracked software falls in the same line.

If you took the time to try and understand Massive, why not just take the time to try and understand software that you can actually afford? Massive is not a requirement. There's plenty of really great synths out there at a very reasonable price, and in some cases you might as well have stolen them for the price you end up paying.

JBE wrote:This forum is not allowed to encourage the use of cracked software in anyway. Helping someone fix an issue that would enable them to use said cracked software falls in the same line.

If you took the time to try and understand Massive, why not just take the time to try and understand software that you can actually afford? Massive is not a requirement. There's plenty of really great synths out there at a very reasonable price, and in some cases you might as well have stolen them for the price you end up paying.

i wasnt encouraging it, just helping him resolve his issue so his question can be answered and this thread be done with.

WUB please close this thread

If you go into your local files, there's a database files or two outside all of the folders, just delete those and let it load up again and it's sweet, I'll try and find a link for you though. Just to be clear, I have now bought the software, but I don't make too much money, so I usually pirate until I can afford to buy, like a demo period.

It's in http://www.psymusic.co.uk/forum/threads ... ase.48461/ this thread, on the second post, where the x's are the database files, I would advise putting them into your recycling bin in case this doesn't work for you, but I deleted both and it ran fine, and all my saved basses were still there.

For ten hours of work you can get a super powerful synth. That is ridiculous. Seriously think about it.

I was not encouraging it either and yeh I always delete the database file so it's not that.. Meh I dno I fkd around with 3xosc n got some decent results just before.. Noway what do u recommend for 10 hrs work? Lol

Kids pirating software like this drives me nuts! If you pirate it you haven't had to commit anything serious to the product and I genuinely feel this is reflected in the productions.
There's loads of free vsti's and other bits out there that are legit. Build your own workstation and put some time and effort into it instead of just ripping off imageline's hard work.

snypadub wrote:Kids pirating software like this drives me nuts! If you pirate it you haven't had to commit anything serious to the product and I genuinely feel this is reflected in the productions.
There's loads of free vsti's and other bits out there that are legit. Build your own workstation and put some time and effort into it instead of just ripping off imageline's hard work.

There's plenty of people who buy their stuff and make shit tunes..