Page 1 of 1
Tweaking Parameters/Routing with Massive+FL
Posted: Mon Aug 22, 2011 10:12 am
by honeybuzzard
Ah yes, this is the forum I need to be in. So far the public over at NI forums have been stupidly unhelpful. But then again, this is probably an age old question. I've had a nose about the dubstep forums and there seems to be related questions to mine, and they have been fixed. But not quite working for me. I am having serious issues using Massive as a VSTI/plugin/whatever with FL10.
I use a PC keyboard for now because I am skint from buying endless programs etc. etc. and I can't get Massive working with it. I don't want to run massive as a separate program then save anything as a wav and import it into FL. I like to keep it all tidy instead of opening and closing shit. If I open massive in FL I can happily use the keyboard and kick out a few notes. As soon as I do ANYTHING, tweak a parameter, move shit around in massive the sound cuts out. The keyboard does nothing. Massive's little Db meter to the right is dead, as if its not outputting any sound. If I click back into the pattern window in FL, then back to Massive, I am back at square one.
I have had suggestions to rerouting massive with FL using virtual midi controllers. Right now I have the Loopbe1 plugin, Yoke, Bome's Keyboard and MIDI-OX. I also tried Vimidi but it fucks with my mouse and moves it all over the place. I can route Bome with FL as a keyboard midi controller - but I still have to click out of massive/FL onto Bome's to be able to use the keyboard to produce a note - so there is no benefit at all in using Bome. (As far as my knowledge goes, its a seperate window)
I have a basic knowledge of MIDI, so any tutorials would be more than helpful because it pisses me off so much that the VST some would consider the best synth for dubstep fails to work naturally with FL.
P.s. I have noticed Bome has a option to pop in a knob preset file from reason, I was wondering if FL has the same file(ish) that could be dropped into Bome? Would it help?
Thoughts/links appreciated.
Oh, and posting 'get a midi keyboard' is of no help to me right now
Richard
Re: Tweaking Parameters/Routing with Massive+FL
Posted: Mon Aug 22, 2011 10:43 am
by RandoRando
cracked software is cracked,
Re: Tweaking Parameters/Routing with Massive+FL
Posted: Mon Aug 22, 2011 11:10 am
by benjam
There was another thread recently that had the solution. Theres an target window option somewhere that sorts this out. Check the fruity thread I think its in there.
Re: Tweaking Parameters/Routing with Massive+FL
Posted: Mon Aug 22, 2011 11:31 am
by Dzanjin
I had/have this problem too, I found something decent to work around it with. BUT let me know if there is an actual fix for it! The way I do it (when I'm not in Live

is I click into fruity loops and have an empty pattern selected and click play. Open massive and hold down a key on your keyboard. WHILE HOLDING THE KEY, click and drag knobs/other parameters in massive to get the sound you want. Most of the time the sound will continue to play even after releasing the key. BUT it will change real time based on whatever it is you're doing in massive.
Kind of annoying to have one long drawn out note that you can't stop until you the stop button, but it beats playing a sound, messing with settings in silence, and then click in fl and listening to it again.
If anyone can find an actual fix somewhere please post it here! Thanks!
Re: Tweaking Parameters/Routing with Massive+FL
Posted: Mon Aug 22, 2011 6:49 pm
by honeybuzzard
Struggling to find that fruity thread, will keep looking but thanks for the input
Re: Tweaking Parameters/Routing with Massive+FL
Posted: Mon Aug 22, 2011 9:34 pm
by blinx
wow glad i never had this issue. Is this the most up to date massive?
Re: Tweaking Parameters/Routing with Massive+FL
Posted: Tue Aug 23, 2011 10:15 pm
by Dzanjin
honeybuzzard wrote:Struggling to find that fruity thread, will keep looking but thanks for the input
Still trying to find it myself

Re: Tweaking Parameters/Routing with Massive+FL
Posted: Wed Aug 24, 2011 11:22 am
by honeybuzzard
Yup, I've been trying different searches off an on for the last few days, if anyone has a link it would be greatly appreciated
Re: Tweaking Parameters/Routing with Massive+FL
Posted: Fri Aug 26, 2011 4:36 am
by mikeyp
Currently on my phone and nowhere near my computer but I remember reading the thread with the solution. It was something like a simple setting in massive. I can't remember exactly what its called now but if I can get to it before any of you ill post it
Re: Tweaking Parameters/Routing with Massive+FL
Posted: Fri Aug 26, 2011 4:43 am
by jrisreal
click out of the massive window and click on the step sequencer or something and you will probably have your MIDI back. and the best solution to this problem is to use a MIDI keyboard, not a computer qwerty keyboard.
Re: Tweaking Parameters/Routing with Massive+FL
Posted: Fri Aug 26, 2011 4:55 am
by nowaysj
It is advisable to purchase an at least decent midi controller for this and many other reasons. Music production will be so much more fun with it.
Re: Tweaking Parameters/Routing with Massive+FL
Posted: Fri Aug 26, 2011 2:16 pm
by Dzanjin
jrisreal wrote:click out of the massive window and click on the step sequencer or something and you will probably have your MIDI back. and the best solution to this problem is to use a MIDI keyboard, not a computer qwerty keyboard.
That's what I was trying to say earlier in this thread, but I know there is a way so you don't have to keep doing that. I need a good 4 octave midi controller anyone have personal advice pm me

Still looking for solution.
Re: Tweaking Parameters/Routing with Massive+FL
Posted: Fri Aug 26, 2011 2:18 pm
by Teknicyde
Dzanjin wrote:jrisreal wrote:click out of the massive window and click on the step sequencer or something and you will probably have your MIDI back. and the best solution to this problem is to use a MIDI keyboard, not a computer qwerty keyboard.
That's what I was trying to say earlier in this thread, but I know there is a way so you don't have to keep doing that. I need a good 4 octave midi controller anyone have personal advice pm me

Still looking for solution.
Go to your local mega-department-store and find some cheap kids toy that happens to support midi, you'd be shocked how many there actually are these days.
Re: Tweaking Parameters/Routing with Massive+FL
Posted: Fri Aug 26, 2011 2:47 pm
by Dzanjin
Teknicyde wrote:Dzanjin wrote:jrisreal wrote:click out of the massive window and click on the step sequencer or something and you will probably have your MIDI back. and the best solution to this problem is to use a MIDI keyboard, not a computer qwerty keyboard.
That's what I was trying to say earlier in this thread, but I know there is a way so you don't have to keep doing that. I need a good 4 octave midi controller anyone have personal advice pm me

Still looking for solution.
Go to your local mega-department-store and find some cheap kids toy that happens to support midi, you'd be shocked how many there actually are these days.
Wow really? Lol I'll have to check it out. Or get my roomate to raid his nephews toybox .... X-D anything you've seen specifically that you could post here?
Re: Tweaking Parameters/Routing with Massive+FL
Posted: Fri Aug 26, 2011 6:19 pm
by nowaysj
Give me your address, and I'll come over there and set everything up for you.
Re: Tweaking Parameters/Routing with Massive+FL
Posted: Sat Aug 27, 2011 12:37 am
by mikeyp
Click the little menu arrow, then click ''smart disable''
Problem solved
Re: Tweaking Parameters/Routing with Massive+FL
Posted: Sat Aug 27, 2011 3:15 am
by Dzanjin
nowaysj wrote:Give me your address, and I'll come over there and set everything up for you.
No-way, nowaysj! That would be awesome!! Can you do my dishes too!? I knew this forum had helpful people, but dang bro, you're steppin up!!
Re: Tweaking Parameters/Routing with Massive+FL
Posted: Sat Aug 27, 2011 3:28 am
by Dzanjin
mikeyp wrote:Click the little menu arrow, then click ''smart disable''
Problem solved
Tried it....still no dice :-/
Anyone else found a fix?
Re: Tweaking Parameters/Routing with Massive+FL
Posted: Sat Aug 27, 2011 9:28 am
by dublerium
mikeyp wrote:Click the little menu arrow, then click ''smart disable''
Problem solved
This, in FL just click on the wrapper settings top left of massive, then click the box 'don't allow keyboard focus' and then it works, this is in the FL thread I posted it there too.