Page 1 of 1
Why is there a delay when I put Ping-Pong delay on in Ableto
Posted: Fri Feb 17, 2012 6:55 pm
by dansheep13
Ok I'm not talking about the delay that the ping-pong puts on. Hopefully I'm not that dumb...I'm talking about when I turn the device from off to on via automation, there is roughly a second gap before the audio reaches a similar level to when it was off. Anyone had this problem before?
Re: Why is there a delay when I put Ping-Pong delay on in Ab
Posted: Fri Feb 17, 2012 7:20 pm
by Samuel_L_Damnson
Is the dry/wet all the way up? thats my best guess im not very knowledgeable with abelton.
Re: Why is there a delay when I put Ping-Pong delay on in Ab
Posted: Fri Feb 17, 2012 7:22 pm
by 123kidd
title made me lol.
Running any plugins causes some amount of latency. Some tutorial on youtube talked about this. This is important in parallel compression. When doubling up a channel and whacking a compressor on, you want to the same on the unaffected channel but turn the compressor off.
You may want to automate the wet/dry instead of the on/off.
Re: Why is there a delay when I put Ping-Pong delay on in Ab
Posted: Fri Feb 17, 2012 8:33 pm
by RandoRando
dansheep13 wrote:Ok I'm not talking about the delay that the ping-pong puts on. Hopefully I'm not that dumb...I'm talking about when I turn the device from off to on via automation, there is roughly a second gap before the audio reaches a similar level to when it was off. Anyone had this problem before?
try using a different time mode by right clicking the device titlr and selecting another one