Page 1 of 5
Buy & Sell Thread
Posted: Wed Jan 28, 2009 7:38 pm
by DZA
SHIT FOR SALE
like spinning plates wrote:M-Audio Keystation Pro 88
88-note fully weighted keyboard. over 60 buttons, knobs and faders. Near mint condition. Some minor cosmetic damage. Still has the plastic thing on the screen, so you get the ultimate satisfaction of peeling that off too. 150 quid maybe.
Buyer collect, near Brixton.
http://www.soundonsound.com/sos/Oct04/a ... tation.htm
Posted: Wed Jan 28, 2009 8:20 pm
by pandacub
1.Soundcraft spirit folio 12 channel mixer...
really clear gain stages, wholesome and useable EQ...
I've used it happily for about a year, found a bargain so upgraded to a 16 channel...
on ebay I've seen them regualrly for 200gbp
Any offers?
Posted: Wed Jan 28, 2009 9:57 pm
by lewisr
I have a roland juno D, its a few years old now (maybe 5?). its a synthesizer, has a fair amount of good patches on it. 5 freely assigneable knobs. and a Laser. the laser is ace, its the roldand D beam, freely midi assignable (wobble speed? filter cutoff, imagine the possibilities).
however, it is 5 years old so there are a few broken bits, c#4 doesnt work at all, and 2 other notes have different velocities (i.e. press them gently and they still play at max) But, i have spoken to a local kyboard repair guy who said this can eaily be fixed for around the £50 mark.
Its not strictly for sale, but i dont really use it that much anymore. so anyone that wants is PM me with some sensible offers. It was £450 new i think. I still have the manual and if you pay for the extra postage i can send a X frame keyboard stand as well.)
Posted: Thu Jan 29, 2009 6:37 pm
by steveydubz
Posted: Fri Jan 30, 2009 9:02 am
by tk
micro korg synth, bought for £250 a couple years back doesn't get much use these days. PM me if you want anymore details
http://www.korg.co.uk/products/pro_keyb ... rokorg.asp
Cheers
Posted: Thu Feb 05, 2009 3:51 am
by mattyman
bumpizzle
Posted: Thu Feb 05, 2009 3:55 am
by djake
sticky????
Posted: Thu Feb 05, 2009 4:00 am
by future one
AKAI S6000 Sampler
Going cheap.
I live in New Zealand.
Posted: Sun Feb 08, 2009 4:53 pm
by mattyman
djake wrote:sticky????
I Second That Motion.
Posted: Sun Feb 08, 2009 5:52 pm
by azair
I have a roland juno D, its a few years old now (maybe 5?). its a synthesizer, has a fair amount of good patches on it. 5 freely assigneable knobs. and a Laser. the laser is ace, its the roldand D beam, freely midi assignable (wobble speed? filter cutoff, imagine the possibilities).
How much for the Roland Juno D?
Posted: Mon Feb 09, 2009 2:40 pm
by loopz
I've been thinking for a while about getting hold of a copy of Ableton Live, anyone got a copy they aren't using anymore?
weic
Posted: Wed Feb 11, 2009 9:22 am
by bjzyxty
胃癌晚期病因及风险因素
饮食因素
盐腌食品
烟熏的肉干、咸鱼、鱼露和蟹浆等高盐食物
缺乏或摄入过少蔬菜、水果和牛奶
烫食、进食快、三餐不定时
饮用水中镍、硒和钴含量高
吸烟
食用使用氮肥的蔬菜
滑石粉
遗传因素
胃癌预防
晚期胃癌的预防重点在饮食方面。
（ 1 ）避免进食粗糙食物
（ 2 ）少吃或不吃盐淹食品
（ 3 ）多吃新鲜的蔬菜和水果；多饮牛奶
（ 4 ）少吃烟熏、油炸和烘烤食物
（ 5 ）改进饮食习惯和方式：要按时进食，避免暴饮暴食；食物不能过烫，进食不宜过快；进食时情绪愉快，欢乐开朗；不饮烈酒，不抽烟。
胃癌 临床病理分期
我国
胃癌治疗 TNM 分期：全国胃癌协作组参照 UICC 倡导的 TNM 分期法，根据原发病灶的大小、浸润深度、淋巴结转移程度及有无远处转移等条件，于 1978 年初步制订了我国的
胃癌 TNM 分期法。
（ 1 ）原发肿瘤（ T ）分期：
T1 不管肿瘤大小，癌灶局限于粘膜或粘膜下层的早期胃癌。
T2 癌灶侵及肌层，病灶不超过 1 个分区的 1/2 。 ( 分为 3 个区 )
T3 肿瘤侵及浆膜，或虽未侵及浆膜，然病灶已超过 1 个分区的 1/2 ，但未超过 1 个分区。
T4 肿瘤已穿透浆膜，或大小已超过 1 个分区。
（ 2 ）淋巴结转移（ N ）分期：
N0 无淋巴结转移。
N1 为离癌灶最近，贴近于胃壁的第 1 站淋巴结有转移，包括贲门右、左，胃小弯、胃大弯，幽门上、幽门下以及脾门淋巴结。
N2 远隔癌灶部位的第1站淋已结有转移（如胃窦癌有贲门旁或脾门淋巴结转移或贲门癌有幽门上下淋巴结转移）或有胃左动脉旁、肝总动脉干、脾动脉干及胰十二指肠后第 2
站淋巴结的转移。
N3 有腹腔动脉旁、腹主动脉旁、肝十二指肠韧带、肠系膜根部及结肠中动脉周围的第 3 站淋巴结转移。
（ 3 ）远处转移（ M ）分期：
M0 无远处转移。
M1 远处转移。
（ 4 ）临床分期：
I 期 无淋巴结转移或仅有邻近第 1 站淋巴结转移的早期胃癌，即 T1N0~ 1M 0 。
Ⅱ期 癌肿侵及肌层或浆膜层，病变范围未超过 1 个分区，没有或仅有邻近第 1 站淋巴结转移，即 T2~3N0~ 1M 0 。
Posted: Sat Feb 14, 2009 9:18 pm
by mattyman
BUMP! again.
and
http://www.cashconverters.co.uk
is sick for stuff.
i got some Sony MDR-V700's for £40
bargain!
and check this place out too.
http://www.musicalads.co.uk/
good shiz off for sale.
safe
Posted: Sat Feb 14, 2009 11:52 pm
by djake
Posted: Wed Mar 18, 2009 1:41 am
by mattyman
BUMP.
and im waitin for someone to sell some good monitors =]
& sticky this badboy
Re: Production Forum Buy And Sell Thread
Posted: Wed Dec 16, 2009 4:22 pm
by Depone
Im selling my old production iMac loaded to the brim with music apps, plugins etc...
Here are the specs-
Apple iMac Intel 1.83GHz Duel Core
17" Built in widescreen TFT active-matrix LCD - 1680 x 1050 pixels
2 GB DDR 2 RAM
160 GB HDD (7200 RPM)
ATI Radeon x1600 Video card (125meg video ram)
USB & Firewire 400
Airport extreme card
Bluetooth
Built in stero speakers
Keyboard & mouse
8x SuperDrive with (DVD+R DL DVD/RW CD-RW)
OSX Version 10.6 (Snow leopard)
Ask me for any details etc.. comes with original box and install disks (For OSX 10.4, not 10.6)
Its got a few stickers on it but still works fine.
Im looking for around £380-400 for this mac. Local pickup only (West london)
Re: Production Forum Buy And Sell Thread
Posted: Wed Dec 16, 2009 4:31 pm
by marshy
I've got all this for sale. Not too keen on losing the MC303 or the MicroKorg, but if the price is right then it's all yours.
Roland MC-303 Groovebox;
Zoom ST-224 Sampler;
Korg Microkorg
Dunlop Heil Talkbox
Roland PR100 Sequencer
MAudio Keystation 49e
Re: Production Forum Buy And Sell Thread
Posted: Tue Dec 22, 2009 4:00 pm
by marshy
Bump!
Re: Production Forum Buy And Sell Thread
Posted: Wed Dec 23, 2009 11:09 pm
by Littlefoot
I think you may have already sold your soul to this forum Daniel
Re: Production Forum Buy And Sell Thread
Posted: Wed Dec 23, 2009 11:15 pm
by deadly_habit
how much for the roland pr100 sequencer?
