Dubstepforum.com

Working on a new glitchy style tune, a few things need touching up, but would like to hear opinions. Cheers

First Tune on the MyspacePlayer

http://www.myspace.com/tabzdubstep

Let me know if you want a 320 and I'll pm a link.

LIKES IT IF YOU WANNA SEND ME ANY 320'S THAT WOULD BE SICK...AM FEELIN RUNNER AND THE SLEW DEM REMIX THING TOOO!!!!!!

PEACE UP
MATT

Will sort you out a 320 for the Slew Dem Remix. Runner was the first tune I made, so going to go back and rework it a bit but will send that over once its done. Got a little way to go on wake up call so I'll let you know when its finished. Cheers for the feedback.

Finshed it off this evening so 320 is on your way.

I like the first track, a lot! Totally feelin the minimalist glitchy vibe! You tunes sound really loud! (in a good way)

any tips on production or mastering you want to share with a hungry artist just starting out? I

think a couple vocal samples would make the first tracks sound even better.......

320 would be ill!

Yeh, I know what you mean, don't have time to sample hunt at the moment.

I just focus on EQ'ing each part properly, try and keep it quite level on the analyser, and make sure you EQ out the unused frequencies as not to take up the space in the mix. Then compress and sidechain to keep everything sounding loud and punchy. Limiters also work wonders.

I was also taught a little trick that by EQ'ing out around 800hz, you can get a lot better quality sound. Something to do with Mobiles and other low quality sound equipment and focusing around 800hz making it sound worse to the ear.

Also, PM Sent.

Wake Up Call - like this track a lot. Simple and atmospheric. a little too short tho Roll on your next track mate.

Just listened to IN THE SYSTEM on your player - yep - this track will be dropped on my next mix. Love it mate.

hum.. Right on. I have a hard time getting things sounding loud with compression an limiting, without distorting the signal. What plug-in's an program are you using to produce?

def. could use a 320 of this one...

Wake me up...

baydestrian wrote:hum.. Right on. I have a hard time getting things sounding loud with compression an limiting, without distorting the signal. What plug-in's an program are you using to produce?

I'm using the Waves Bundle, mainly the REQ 6, C1 Compressor, L2 Limiter, and PAZ Analyser. It's possible that you are not EQ'ing properly, as things will not sound loud if too much is in the frequency range, then pushing it louder will only distort it. Don't let your kick's take up too much range, and if they do sidechain to allow them the space. Even high-hats will have some unused low range frequencies. Focus on the analyser to see if there are any spikes, these can cause distortion from increasing the volume. If you need anything explained in detail I'll see what I can do.

Also, PM's Sent