Dubstepforum.com

hi,this is my first post..Im new in dubstep creation...I wanna ask you something that is qwite vital in dubstep making wich is the wobbly bass.Ive seen some tutorials on youtube but Im not so convinced.How do you create by using Malstrom a nice wobbly bass and how do you control the rate..?

Check the bible and if there is nothing in there about wobble bass then on the Malstrom use the wobble button and the rate button.

in.

Welcome to DSF Be warned of flying Alpacas!

Using the default patch (sinewave/no filters), route the audio through the shaper/Filter A, then through a reverb with medium decay and 15% dry/wet (mostly dry).

Back on the Malstrom, turn on the shaper and set the amount to round 45%. On Modulator B, turn down the 'Filter' knob so that Mod B is controlling the filter cutoff of Filter A. You should have a nice wobble. Adjust the filter, shaper amount and reverb to taste.

thanks..you get really fast answers on this forum

I feel like an internet bully:(

Futures Untold has told you how to do it, goodluck:)

I suggest you have a good read of the sticky threads on this forum for production tips of common questions to get started.

Serox wrote:I feel like an internet bully...

Perhaps we could hijack this thread into a Alpaca Society meeting?

Check this shizzle fo Alpaca Herdin pimpz.... ---> http://soft.driversdown.com/soft/Alpaca ... 6877.shtml

Actually, I just tried those settings in my first post and they sound shit.

You need a really low shaper amount, maybe 5 or 10. Adjust filter and verb to taste etc..

Honestly were are all these alpacas coming from!

1. Create combinator
2. Insert Line mixer 6:2
3. Insert Malstrom Synthesizer
4. For mod B turn the filter to the right to 52 and in oscillator A turn octave to 2
5. Activate shaper and turn amt to the right 115
6. In filter A panel turn frequency to the left to 35
7. Press show programmer and click the malstrom in the device list
8. On the right side for source rotary 1 choose the target mod b rate
9. Activate sync on mod b
10. Move rotary 1 until you have acquired the desired wobble rate

This is a fairly basic guideline, experiment and you will get better results.

Cheers.

HAACK wrote:Honestly were are all these alpacas coming from!

Google

1. Create combinator
2. Insert Line mixer 6:2
3. Insert Malstrom Synthesizer
4. For mod B turn the filter to the right to 52 and in oscillator A turn octave to 2
5. Activate shaper and turn amt to the right 115
6. In filter A panel turn frequency to the left to 35
7. Press show programmer and click the malstrom in the device list
8. On the right side for source rotary 1 choose the target mod b rate
9. Activate sync on mod b
10. Move rotary 1 until you have acquired the desired wobble rate

This is a fairly basic guideline, experiment and you will get better results.

Cheers.

But seriously, if you want to learn how to make basses in Reason, download my bass patches from here ---> http://dubstepforum.com/viewtopic.php?t ... sc&start=0 and reverse engineer them

Did you search this forum and the web? At all? There's tons of tutorials, see one, you seen em all. Also wobble is definately not vital to dubstep.

oh dear thats an unfortunate question to ask, it's a very popular one that's been well answered. search --> wobble. luckily futures untold is very helpful, most of the other people will post alpaca pictures if you ask something.... erm.. they dont want to answer anymore.

Anyway at least you didn't ask how to make Caspa or rusko bass. Oh and BTW if they tell you there's a button, they're lying (caspa is a knob control).