Dubstepforum.com

ChadDub wrote:Son deciding to read the manual of FL was a good idea. This is amazing.

damn i always put them in accidentally, and never really knew how to use them.. nice one.

ChadDub wrote:Did you guys know about this?

http://flstudio.image-line.com/help/htm ... imeMarkers

O_O

The example of it is in the picture at the top of the page.

omfg

time markers? u guys didnt know about time markers?

ChadDub wrote:Did you guys know about this?

http://flstudio.image-line.com/help/htm ... imeMarkers

O_O

The example of it is in the picture at the top of the page.

i'm more excited to see the pic of the project picker under it
i get so many sweeps samples in huge projects that i forget which is which, now I can see the waveform and know which one i'm looking for!

so i figured out something that was bugging me for a while, how to change your axiom`s midi maps within FL...You need to create one basic template, then you assign your controls to lets say, mixer, take a snapshot and store it to P01 then recall P02 and assign the same controls to something else, then store that to P02. Now you will be able to switch between those two snapshots/programs, it only works within the template/project you assigned those mappings. If you recall some other template the snapshots dont work. If I knew midi I`d be able to explain it better...

Sheff wrote:

snick01 wrote:Don't know if its being covered but it pisses me off greatly. when im trying to program a synth on my laptop, whenever i tweak a knob i have to click off the synth then back onto it for it to accept my laptops keyboard midi messages! i don't have this problem with my proper midi keyboard. it makes creating patches a bitch! (tweak a knob, click off synth, click back on synth, press some keys to make a sound, tweak knob again, cli.........etc)

googled but couldn't find anything! help appreciated...

yep same here, does it with all synths in fruity for me



i just draw a long note on c5 in the piano roll and hit play and tweak it like that.
still would like to how to fix it tho

idk if anyone answered this yet but this is how to fix this:

go to ur plugin wrapper, look at the top left hand corner and you should see a little gear. click that, look under the tab that says "visual" and click "don't allow keyboard focus". fixed

coogcoo wrote:

Sheff wrote:

snick01 wrote:Don't know if its being covered but it pisses me off greatly. when im trying to program a synth on my laptop, whenever i tweak a knob i have to click off the synth then back onto it for it to accept my laptops keyboard midi messages! i don't have this problem with my proper midi keyboard. it makes creating patches a bitch! (tweak a knob, click off synth, click back on synth, press some keys to make a sound, tweak knob again, cli.........etc)

googled but couldn't find anything! help appreciated...

yep same here, does it with all synths in fruity for me



i just draw a long note on c5 in the piano roll and hit play and tweak it like that.
still would like to how to fix it tho

idk if anyone answered this yet but this is how to fix this:

go to ur plugin wrapper, look at the top left hand corner and you should see a little gear. click that, look under the tab that says "visual" and click "don't allow keyboard focus". fixed

WOW. YOU ARE FUCKING GOD. THANK YOU SO MUCH!!!!

I have a question, is there a way for me to have a kick drum, and have a bass, and have them play at the same time, but have my bass able to change notes while my kick stays the same?

ChadDub wrote:

coogcoo wrote:

Sheff wrote:

snick01 wrote:Don't know if its being covered but it pisses me off greatly. when im trying to program a synth on my laptop, whenever i tweak a knob i have to click off the synth then back onto it for it to accept my laptops keyboard midi messages! i don't have this problem with my proper midi keyboard. it makes creating patches a bitch! (tweak a knob, click off synth, click back on synth, press some keys to make a sound, tweak knob again, cli.........etc)

googled but couldn't find anything! help appreciated...

yep same here, does it with all synths in fruity for me



i just draw a long note on c5 in the piano roll and hit play and tweak it like that.
still would like to how to fix it tho

idk if anyone answered this yet but this is how to fix this:

go to ur plugin wrapper, look at the top left hand corner and you should see a little gear. click that, look under the tab that says "visual" and click "don't allow keyboard focus". fixed

WOW. YOU ARE FUCKING GOD. THANK YOU SO MUCH!!!!

I have a question, is there a way for me to have a kick drum, and have a bass, and have them play at the same time, but have my bass able to change notes while my kick stays the same?

is this bass and kick drum one audio file of them playing together?


not sure if troll....

ChadDub wrote:

coogcoo wrote:

Sheff wrote:

snick01 wrote:Don't know if its being covered but it pisses me off greatly. when im trying to program a synth on my laptop, whenever i tweak a knob i have to click off the synth then back onto it for it to accept my laptops keyboard midi messages! i don't have this problem with my proper midi keyboard. it makes creating patches a bitch! (tweak a knob, click off synth, click back on synth, press some keys to make a sound, tweak knob again, cli.........etc)

googled but couldn't find anything! help appreciated...

yep same here, does it with all synths in fruity for me



i just draw a long note on c5 in the piano roll and hit play and tweak it like that.
still would like to how to fix it tho

idk if anyone answered this yet but this is how to fix this:

go to ur plugin wrapper, look at the top left hand corner and you should see a little gear. click that, look under the tab that says "visual" and click "don't allow keyboard focus". fixed

WOW. YOU ARE FUCKING GOD. THANK YOU SO MUCH!!!!

I have a question, is there a way for me to have a kick drum, and have a bass, and have them play at the same time, but have my bass able to change notes while my kick stays the same?

clone you're kick's MIDI and use it in the bass. Pitch the bass to your liking.

RandoRando wrote:time markers? u guys didnt know about time markers?

LOL! Didn't read the manual, still haven't. Figured these out on my own.

Okay so Im using FL Studio 10 and I linked Massive by Native Instruments and each time I open it in FL Studio 10 it glitches. I press one of the keys on my keybord to check the sound but after lets say I turn a knob or adjust the octave in Massive the sound doesnt come unless I refresh it as in minimize it and reopening it. Its a pain to keep doing just so I can check what it sounds like. Please Help Dx

DTsriwi wrote:Okay so Im using FL Studio 10 and I linked Massive by Native Instruments and each time I open it in FL Studio 10 it glitches. I press one of the keys on my keybord to check the sound but after lets say I turn a knob or adjust the octave in Massive the sound doesnt come unless I refresh it as in minimize it and reopening it. Its a pain to keep doing just so I can check what it sounds like. Please Help Dx

Is any of your software cracked?

DTsriwi wrote:Okay so Im using FL Studio 10 and I linked Massive by Native Instruments and each time I open it in FL Studio 10 it glitches. I press one of the keys on my keybord to check the sound but after lets say I turn a knob or adjust the octave in Massive the sound doesnt come unless I refresh it as in minimize it and reopening it. Its a pain to keep doing just so I can check what it sounds like. Please Help Dx

If you would read like fucking 5 posts up you would see that some guy posted a solution to that already.

ChadDub wrote:

DTsriwi wrote:Okay so Im using FL Studio 10 and I linked Massive by Native Instruments and each time I open it in FL Studio 10 it glitches. I press one of the keys on my keybord to check the sound but after lets say I turn a knob or adjust the octave in Massive the sound doesnt come unless I refresh it as in minimize it and reopening it. Its a pain to keep doing just so I can check what it sounds like. Please Help Dx

If you would read like fucking 5 posts up you would see that some guy posted a solution to that already.

if you had done a search you would have found it has been answered 100 times in the forum before you knew about it so easy chad, easy

I was wondering,Is there a way to copy events in FL STUDIO 10 ? F.e. If i click filter cutoff and edit its events,is there a way to assign same movement to another plugins knob ? Thanks

in the edit events window, simply go to edit>copy, and then edit>paste in the new one

tried it,but nothing happens

i just did try it, and it worked. so idkk

donpablo wrote:I was wondering,Is there a way to copy events in FL STUDIO 10 ? F.e. If i click filter cutoff and edit its events,is there a way to assign same movement to another plugins knob ? Thanks

Copy the event timeline in the playlist so you have two versions of it. Then double click on the one you want and change the source of what it's controlling

I apologize if this has already been asked. It's similar to the previous question. Let's say I draw an automation clip for the amplitude of one synth, and I want that same automation clip to do the same thing to the cutoff on a low cut filter on another synth (not necessarily the same EXACT clip, just the same exact automation). Is there a way to copy and paste or save what exactly the automation clip looks like on a different parameter? Like, is there a way to clone the automation of one parameter and use it on another?